Chucks Products

HBM CK 4-4 S Wood Chuck for Wood Lathe Ø100 mm.

(3)

Diameter 100 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM myford flange

(1)

Diameter 100 of 125 mm. |Recording 1.1/8" x 12 TPI. |

HBM 95 mm Professional Wood Chuck for Wood Lathe Complete Set

(1)

Diameter of the chuck 95 mm. |

HBM adapters for wood chucks

All our products have a warranty of at least 1 year.

HBM 3 chucks

(1)

Diameter 80 mm. |Height of the chuck including jaw 66,5 mm. |Recording Voor en Achtermontage. |Maximum speed 4000 O/min. |Diameter 100 mm. |Height of the chuck including jaw 74,5 mm. |Maximum speed 3000 O/min. |Diameter 125 mm. |Height of the chuck including jaw 84,5 mm. |Diameter 160 mm. |Height of the chuck including jaw 109 mm. |Maximum speed 2500 O/min. |Diameter 315 mm. |Height of the chuck including jaw 156.5 mm. |Maximum speed 1200 O/min. |

HBM Aluminum Top Jaws with Rubber for Extra Grip For in the bench vice

HBM Aluminum magnetic top jaws with Rubber clamping surface for in the vice. These aluminum magnetic top jaws are provided with rubber clamping surfaces in which grooves have been made. These grooves not only provide more grip, but also the possibility to clamp round or polygonal objects. The magnets are milled into the rear of these jaws and consist of iron oxide magnetic strips (iron oxide powder mixed with rubber). . These magnetic strips have the advantage that they are not brittle or fragile (unlike rare-earth or neodymium magnets). As a result, these magnets can never lose small splinters, which can then end up between your machine clamp (or vice) and the top jaw, causing them to no longer connect properly. The magnetic force of these iron oxide rubber strip magnets , is also such that the top jaws are properly pulled towards the clamp (or vice) without magnetizing your workpiece. These magnetic top jaws are available in the following widths: 100 mm - Item no. 9890. 125 mm - Item no. 9891. 150 mm - Item no. 9892.

HBM HV-6 160 mm Professional Dividing Table with 160 mm 3-jaw chuck, MC2, 3 slots, T-slots 10 mm, 20 kg, 1:90.

Diameter of the chuck 160 mm. |Height of the distribution table 70 mm. |Total height vertical 200 mm. |Height of the distribution table including chuck 152,5 cm. ( Bovenkant klauwplaat ) |Height of the distribution table including chuck 180 mm. ( Bovenkant bekken ) |T - Slots 10 mm. |Number of slots 3. |Recording MC 2. |Transmission 1:90 |Maximum load horizontally 40 Kg. |Maximum load vertical 20 Kg. |

HBM Independent 4-jaw chuck 150 mm 1 inch x 8 TPI

Diameter 150 mm. |Recording 1"x 8 TPI |

HBM Aluminium Flange 150 mm for 100 and 125 mm Chuck DIN 6350

The HBM Aluminium Flange for 100 and 125 mm Chuck DIN 6350 is a practical mounting plate with a clamping set for mounting chucks. This flange is suitable for item 4672, 3509, 1456 and 5061 and offers a fitting solution for those who want to mount 100 and 125 mm chucks. Thanks to its aluminium design, it is a versatile choice for use in the workshop. Main benefits Suitable for chucks of 100 and 125 mm Designed as a mounting plate with clamping set Suitable for multiple HBM items Convenient solution for mounting chucks Product features Brand: HBM Flange diameter: 150 mm Suitable for item 4672, 3509, 1456 and 5061 EAN code: 7435125722798 This HBM Aluminium Flange for 100 and 125 mm Chuck DIN 6350 is a functional choice for securing chucks with the correct dimensions. A practical addition to your workshop equipment.

HBM independent 4 chucks

Diameter 80 mm. |Let through 25 mm. |Height of the chuck including jaw 77 mm. |Recording Achtermontage. |Diameter 100 mm. |Diameter 125 mm. |Let through 30 mm. |Height of the chuck including jaw 78 mm. |Diameter 200 mm. |Let through 50 mm. |Height of the chuck including jaw 110 mm. |Recording Voor en Achtermontage. |

HBM 65 mm Self-centering 3-Jaw Chuck with M14x1 Mount, 12 mm Through Bore, incl. 2 Clamping Pins

Diameter 65 mm. |Recording M14 x 1. |

HBM CK 3,5-4K Wood Chuck for Wood Lathe Ø90 mm

Diameter 90 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM CK 4-4N Wood Chuck for Wood Lathe - 100 mm

Diameter 100 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM self-centering 4 chucks

Diameter 100 mm. |Height of the chuck including jaw 74,5 mm. |Recording Voor en Achtermontage. |Maximum speed 3000 O/min. |Diameter 125 mm. |Height of the chuck including jaw 84,5 mm. |Diameter 160 mm. |Height of the chuck including jaw 109 mm. |Maximum speed 2500 O/min. |Diameter 315 mm. |Height of the chuck including jaw 156.5 mm. |Maximum speed 1200 O/min. |

HBM 100 mm Flange with Clamping Set for 80 mm Chuck

The HBM 100 mm Flange with Clamping Set for 80 mm Chuck is a practical mounting plate for fitting an 80 mm chuck. This flange is suitable for item 3234 and 3509, making it a suitable solution for applications where a firm and accurate attachment is desired. Key benefits Suitable for mounting an 80 mm chuck Includes clamping set for ease of use Applicable to item 3234 and 3509 Product features Brand: HBM Flange diameter: 100 mm EAN code: 7435125680654 This HBM flange with clamping set is a convenient choice for those who want to mount an 80 mm chuck in a suitable and reliable way.

HBM CK 3-3A wood chuck for wood lathe, diameter 75 mm.

Diameter 75 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM 65 mm Self-Centering 4-Jaw Chuck M14x1 Mount, Through Bore 12 mm.

Diameter 65 mm. |Recording M14 x 1. |

HBM CK 5-4 H Wood Chuck for Wood Lathe Ø125 mm.

The HBM CK 5 - 4 H Wood Chuck for Wood Lathe is a practical choice for those looking for a reliable wood chuck for the wood lathe. With a diameter of 125 mm, this model offers a solid base for various woodworking jobs. The wood chuck is made by HBM and is therefore a suitable addition to your workshop. Main benefits Suitable for use on a wood lathe 125 mm diameter for a solid size Made by the HBM brand Product features Product name: HBM CK 5 - 4 H Wood Chuck for Wood Lathe Diameter: 125 mm Brand: HBM EAN code: 7435124931948 This is how you choose a wood chuck that matches the basic needs of the wood lathe and forms a neat, professional addition to your tools.

HBM 200 mm Professional Dividing Table with 200 mm 3-jaw chuck, 12 mm T-slots, MC3, 1:90, 40 kg

Diameter of the chuck 200 mm. |Height of the distribution table 105 mm. |Total height vertical 265 mm. |Height of the distribution table including chuck 180 mm. ( Bovenkant klauwplaat ) |Height of the distribution table including chuck 215 mm. ( Bovenkant bekken ) |T - Slots 12 mm. |Number of slots 3. |Recording MC 3. |Transmission 1:90 |Maximum load horizontally 80 Kg. |Maximum load vertical 40 Kg. |

HBM BS-0 Dividing Device Set with 125 mm 3-Jaw Chuck, 100 mm.

Height 173 mm. |Let through 18 mm. |Center height 100 mm. |

HBM independent 4 chucks for metal lathes

All our products have a warranty of at least 1 year.

HBM Wood Chuck CK 2-4 S 50 mm for Wood Lathe

(1)

Diameter 50 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM CK 6-4 H Wood Chuck for Wood Lathe - Ø150 mm.

(2)

Diameter 150 mm. |Recording M33 / 1"x8 / 3/4"x16. |

HBM soft jaw chucks

These soft jaws only fit on the new HBM DIN 6350 chucks. They do not fit on the jaw plates that are fitted as standard on our machines.

HBM BS-1 Dividing Device Set with 160 mm 3-Jaw Chuck

Height 220 mm. |Let through 20 mm. |Center height 116.4 mm. |

Volkel Sanitary Set G 1/4 - 3/4 inch, 9-piece.

The Volkel sanitary set G 1/4 - 3/4 inch, 9-piece is a practical set for re-cutting and cleaning damaged threads in the plumbing sector. Thanks to the most common thread sizes, this set is suitable for a wide range of tasks where accurate and efficient work is required. The set is supplied including a suitable lubricant for smooth use and pleasant handling. Main benefits Suitable for re-cutting and cleaning damaged threads Contains the most common thread sizes for the plumbing sector Includes suitable lubricant for smooth and efficient work Product features Brand: Volkel Type: sanitary set Size range: G 1/4 - 3/4 inch Execution: 9-piece A convenient choice for anyone looking for a complete and practical sanitary set for thread maintenance and repair. EAN: 4022835486503.