Oil Collecting Systems and Oil Extraction Systems Products

HBM oil drip tray 110 x 60 cm

Dimensions 110 x 60 cm. |Height 4 cm. |Material Polyethyleen. |

HBM Professional Electric Diesel Pump , Fuel Oil Pump With 100 Liter Tank

(1)

With the HBM Professional Electric Diesel Pump, Fuel Oil Pump With 100 Liter Tank you can quickly pump diesel or fuel oil without moving your vehicle. This mobile electric fuel pump has a sturdy polypropylene storage tank with a capacity of 100 liters and a 12 Volt electric pump with which diesel or fuel oil can be pumped quickly. The pump can easily be connected to a 12V battery using the supplied battery clamps. The aluminum handle of the filling nozzle is equipped with a hands-free function that shuts off the supply of the liquid as soon as the liquid level hits the nozzle, just like at the gas station. A transparent hose to the vessel is mounted on the suction side of the pump, so that any air bubbles in the liquid can be clearly observed. The pump has an output of 40 liters per minute, which means that the entire contents of the tank can be emptied within two minutes. The pump is fitted with a liquid proof switch to prevent oil or fuel from entering and creating a fire hazard. Technical data Tank capacity: 100 litres Voltage: 12 Volts Capacity: 40 liters per minute Length of the dispensing hose: 400 cm Total dimensions: 90 x 45 x 48 cm The HBM Professional Electric Diesel Pump, Fuel Oil Pump With 100 Liter Tank is extremely shock resistant and made of strong polyethylene. This pump offers reliable and efficient storage of Diesel in the workshop, on the move, breakdown assistance, etc.

HBM 30 liter oil collection system

Capacity 30 Liter. |

HBM manual liquid pump

(1)

The HBM Manual Liquid Pump is a powerful and reliable pump for moving non-corrosive liquids such as engine oil, transmission oil and coolant. Thanks to the Quick-release pressure relief valve and the safety valve, the pump is safe and reliable to use. The pump has a capacity of 9.0 liters (2.35 Gallon) and is equipped with 3 pipes: 7.8x9.8mm X1meter 5.3x6.7mmx1meter 4.0 X 6.0mm X 1Meter With the HBM Manual Liquid Pump you can move your liquids safely and reliably. The pump is easy to operate and offers high efficiency.

HBM 1 liter collection bottle for brake fluid

Technical data of the HBM 1 Liter Collection Bottle for Brake Fluid: Liter bottle with screw cap and galvanized chain and hanging hook For collecting old fluid Elastic silicone hose, resistant to yellowing Guarantees optimal visual inspection The HBM 1 Liter Brake Fluid Collection Bottle is a handy tool for collecting used brake fluid. The bottle has a liter capacity and is equipped with a screw cap, galvanized chain and hanging hook for easy storage. The elastic silicone hose is resistant to yellowing and ensures optimal visual inspection of the collected liquid. Keep your workspace clean and organized with the HBM 1 Liter Brake Fluid Collection Bottle.

HBM drum roller for 200 liter drums

The HBM Drum Roller for 200 Liter Drums is a useful tool for moving heavy drums. With a load capacity of 250 kg and a loading surface of Ø 610 mm, this barrel roller is perfectly suitable for moving 200 liter barrels. The Ø 75 mm wheels are made of metal and ensure smooth and stable movement. Technical specifications: Load capacity: 250 Kg Loading surface: Ø 610 mm, bottom open Wheels: Ø 75 mm, made of metal Order the HBM Drum Roller for 200 Liter Drums today and make moving heavy drums a lot easier!

HBM 6 oil collection tray, oil drip tray model 2

Dimensions 39,5 x 22 x 12 cm. |Content 6 Liter. |Material PE. |

HBM 900mm. Manual Barrel Pump, Oil Pump, Liquid Pump

This manual drum pump from the HBM brand is the perfect solution for pumping liquids from drums safely and without waste. You simply screw the pump into the opening of the barrel and ensure that nothing can come loose and you don't have to fiddle with tilting barrels. The hand pump allows you to transfer small volumes of liquids easily and in a measured manner. Product specifications Pump capacity: 0.25 L Pump length: 900 mm Suitable for jerry cans and barrels: 20 - 200 L

HBM 12 Volt 200 Liter Plastic Mobile Diesel Tank

With the HBM 12 Volt 200 Liter Plastic Mobile Diesel Tank you always have your own gas station at hand. This mobile diesel tank has a capacity of 200 or even 400 liters of diesel, so you can easily refuel your diesel generator, diesel heater or other diesel-fired equipment. The tank is made of impact-resistant polyethylene (PE) and equipped with a 12V diesel pump with an output of 40 liters per minute. At the bottom of the tank, recesses have been made for the forks of a forklift truck or pallet truck, making it easy to move the full tank. The tank comes with a full nozzle and a 2.5 meter long fuel hose. The tank has a lid that can be padlocked. This allows the fuel hose (and also the 12V clamps) to hang outside the tank, but also to be rolled up under the lid. The HBM 12 Volt 200 Liter Plastic Mobile Diesel Tank is a very neat and safe solution for the storage and distribution of your diesel: Capacity of 200 or 400 liters of diesel Made of impact resistant polyethylene (PE) Equipped with a 12V diesel pump with an output of 40 liters per minute Cut-outs for the forks of a forklift truck or pallet truck Supplied with a full nozzle and a 2.5 meter long fuel hose Lid that can be locked with a padlock

HBM 6 Liter Professional Manual Liquid Pump Including 4 Liquid Hoses

The reservoir of the pump is made of plastic and therefore weighs very little. Yet it shields the contents well, so the chance of leakage or bursting is very small. Both the pump and the reservoir are securely attached because they are on the same base, so that they both form a strong unit. You quickly fill the reservoir through a small opening at the top, perfect for a pipe or hose. You can also take the pump with you without any problems thanks to the integrated plastic handle. Suitable for lubricating oils, ATF, coolant, water, other low viscosity fluids. incl. 4 hoses with dimensions of 5,6,8 and 10 mm. Technical data of the HBM 6 Liter Professional Manual Liquid Pump Including 4 Liquid Hoses Content 6 litres Service manually

HBM 20 Liter Mobile Pneumatic Grease Pump 300-400 Bar Pressure

HBM 20 Liter Mobile Pneumatic Grease Pump 300-400 Bar Pressure Fat plays a key role in keeping machines running. With this mobile grease pump you can provide your machinery with the necessary lubricants in no time at all. All kinds of fats and oils can be administered with this grease pump. Thanks to the high pressure of 300-400 bar, even the most viscose greases can be administered with this grease pump. To achieve this high working pressure quickly and easily, the grease pump is pneumatically powered. The grease pump is mounted on two castor wheels and two fixed wheels. This makes this machine easy to move when it is upright, and also easy to pull along with the ergonomic handle to move the grease pump over greater distances. The pressure gauge provides insight into the pressure with which the grease is injected. The special and very solid metal hand gun is suspended in three rotating couplings. This allows you to position the gun even in the most difficult to reach places without being bothered by the sturdy high-pressure hose. Hooks on the handle make it possible to hang the gun and hose on the grease pump, so that the whole can be transported as a compact unit. The 20-litre kettle is easy to open using two clamps that hold the lid in place. In the boiler, the grease or oil is pressed by a piston that seals with the wall of the boiler with a rubber seal. The piston is pressed by a strong spring, pushing the grease to the bottom of the bowl, where it is sucked up through a thick tube that runs through the center of the piston. With this mobile pneumatic grease pump you can ensure that everything runs smoothly anywhere under high working pressure! Technical data of the HBM 20 Liter Mobile Pneumatic Grease Pump 300-400 Bar Pressure. Maximum content 20 litres. perdurk 300 - 400 Bar. Workload 6 - 8 Bar. Capacity 0.85 liters per minute. Compression Ratio 50:1. Units of Measure BAR / PSI. Double scale readings 0 - 150 psi / 0 - 1 MPa. Diameter measured value display 1.5 "œ / 35 mm. Transmission hose length 4 meters. Dimensions (LxWxH) 35 x 40 x 85 cm. Weight 13.95 kg. Shipping dimensions (LxWxH) 40 x 45 x 90 cm. Shipping weight 15.8 kg. The HBM 20 Liter Mobile Pneumatic Grease Pump 300-400 Bar Pressure is supplied as standard. Pneumatic grease pump. Lever dosing gun. Gun nozzle. Dosing gun. Pneumatic hose 4 Meter. Pump cylinder. Pressure gauge and air supply connection. Handle. Cover clamps. Grease container. chassis. 4 wheels. Air filter. Hose connection gun. cover.

HBM Manual Drum Pump, Oil Pump 20 L/Min.

Thanks to this HBM Manual Drum Pump, transferring liquids becomes a piece of cake. With a pump volume of 300 cc and a capacity of no less than 20 liters per minute , this hand pump is ideal for transferring small volumes of liquids. The manual drum pump is suitable for drums from 20 to 200 liters and can be used for various types of liquids such as lubricants, solvents, chemicals, additives and non-corrosive liquids. The HBM Manual Drum Pump is easy to attach to the opening of the drum, which ensures a safe and efficient working method. This means you no longer have to fiddle with tipping barrels and collecting liquids in a cup or bucket. The manual hand pump is made of durable materials and has a robust design, so you will enjoy this high-quality barrel pump from the HBM brand for a long time. Technical specifications: Volume: 20 liters per minute Pump volume: 300 cc Suitable for barrels: 20 to 200 liters Can be used for: Lubricants, solvents, chemicals, additives, non-corrosive liquids

HBM 6 Liter Professional Manual and Pneumatic Liquid Pump Including 4 Liquid Hoses

With this HBM Professional Liquid Pump you can pump all kinds of liquids quickly and efficiently. This handy device has a capacity of 6 liters and comes with 4 liquid hoses, so you can get started right away. The pump is made of high-quality plastic and is therefore lightweight, but also very sturdy and durable. Thanks to the good sealing of the reservoir, you don't have to worry about leakage or bursting. Filling the reservoir is quick and easy through the small opening at the top, where you can connect a pipe or hose. The pump is securely attached to the same base as the reservoir, giving it extra stability and is easy to move thanks to the integrated handle. This liquid pump is suitable for all kinds of low viscosity liquids, such as lubricating oils, ATF, coolant and water. The working pressure of the pump is 85-120 PSI, and it can be operated manually or pneumatically. The diameter of the hoses varies from 5 to 10 mm, so you can always use the right size. Technical features: - Content: 6 litres - Working Pressure: 85-120 PSI - Air inlet: 1/4" - Operation: Manual/Pneumatic - Diameter hoses: 5, 6, 8 and 10 mm With this professional liquid pump from HBM you have a reliable and versatile solution for quickly and efficiently pumping all kinds of liquids.

HBM pneumatic liquid pump

(1)

The HBM Pneumatic Liquid Pump is a powerful pump with a capacity of 9.0 liters (2.35 Gallons). The working pressure is 5 - 10 Bar and the air connection is 1.4". The pump is equipped with a safety valve and a Quick-release pressure relief valve. The pump is suitable for non-corrosive liquids such as engine oil, transmission oil and coolant. The following pipes are included: 7.8x9.8mm X1meter 5.3x6.7mmx1meter 4.0 X 6.0mm X 1Meter The HBM Pneumatic Liquid Pump is a powerful and reliable device that is suitable for various applications. With the safety valve and Quick-release pressure relief valve you are assured of safe and reliable operation.

HBM Mobile Oil Drum Pump For Barrels, Filling System 50 - 60 Liters

This mobile drum filling system is the perfect solution for quickly and easily filling drums with hydraulic, engine, transmission and vegetable oils. Includes electronic flow meter for accurate quantities Suitable for medium to high viscosity oils Consists of mobile trolley, oil pump, digital filling gun, barrel connection and hose Connection: ¼ BSP Internal thread for easy installation This mobile system allows you to fill oil drums quickly and efficiently, saving you time and effort. The electronic flow meter ensures that you always dispense the correct amount of oil. A must-have for every workshop or warehouse!

HBM oil collection tray - oil drip tray 8 liters

(1)

This black oil collection container is made of high-quality plastic and has a capacity of no less than 8 liters. The container is useful for collecting oils and other liquids. Ideal for when you regularly do work on your car. Thanks to the pouring lip, the liquid is easy to pour from the container. The dimensions of the drip tray are 39 x 37 x 11 cm (lxwxh). Because the box is only 11 cm high, it fits easily under the car without having to jack up the car. Characteristics: Made of high quality plastic Capacity of 8 liters Ideal for collecting oils and other liquids Equipped with a pouring lip for easy pouring Dimensions: 39 x 37 x 11 cm (lxwxh) With the HBM oil collector you are well prepared when working on your car. Order now and receive this handy drip tray quickly!

HBM 12 Liter Mobile Pneumatic Grease Pump 300-400 Bar Pressure

HBM 12 Liter Mobile Pneumatic Grease Pump 300-400 Bar Pressure Lubricating your machine park is done very quickly with this grease pump. With a boiler capacity of 12 liters, lubricant or grease can be distributed under a working pressure of 300-400 bar. As a result, even the most viscose greases can be administered with this grease pump. The grease pump is pneumatically actuated, so that the high working pressure is reached quickly and can be maintained for a long time. The grease pump is easy to move thanks to the two fixed wheels and the ergonomic handle on which the grease pump can be pulled. The pressure gauge shows the pressure at which the grease is injected. The grease gun is equipped with three fully rotatable couplings, so that you can also position the gun in hard-to-reach places. The hand gun can be hung from the handle on the hooks provided for that purpose. This ensures that this machine can be stored and transported in a compact form. The lid of the boiler can be opened quickly with two hand screws. Refilling fat or oil has become very easy as a result. This mobile grease pump is the health care of your machine park. Technical data of the HBM 12 Liter Mobile Pneumatic Grease Pump 300-400 Bar Pressure. Maximum content 12 litres. press pressure 300 - 400 Bar. Workload 6 - 8 Bar. Capacity 0.85 liters per minute. Compression Ratio 50:1. Units of Measure BAR / PSI. Double scale readings 0 - 150 psi / 0 - 1 MPa. Diameter measured value display 1.5 "œ / 35 mm. Transmission hose length 4 meters. Dimensions (LxWxH) 31 x 33.5 x 79 cm. Weight 10.95 kg. Shipping dimensions (LxWxH) 36 x 33 x 85 cm. Shipping weight 12.8 kg. The HBM 12 Liter Mobile Pneumatic Grease Pump 300-400 Bar Pressure is supplied as standard. Pneumatic grease pump. Lever dosing gun. Gun nozzle. Dosing gun. Pneumatic hose 4 Meter. Pump cylinder. Pressure gauge and air supply connection. Handle. Cover clamps. Grease container. chassis. 2 wheels. Air filter. Hose connection gun. cover.

HBM Mobile Pneumatic Grease Pump, Grease Drum Pump 20 – 60 Kg

With the HBM Mobile Pneumatic Grease Pump, Grease Barrel Pump 20 – 60 Kg you keep your machinery running like a charm. This grease pump is perfect for administering all kinds of greases and oils, even the most viscous varieties. With an impressive working pressure of 300-400 bar, this pump knows what to do in any situation. On two swivel wheels and two fixed wheels for easy movement Pneumatically powered for quick and easy working pressure With solid metal hand gun and rotating couplings for optimal positioning Suitable for buckets of 18 kg with a diameter of 27.5 cm Thanks to the ergonomic handle, this mobile grease pump is easy to move, even over longer distances. Hang the gun and hose on the grease pump with the handy hooks for a compact unit during transport. Wherever you are, with this grease pump you ensure that everything runs smoothly under high working pressure!

HBM b oil collection system

Working range Van 115 tot 190 cm. |Capacity Van 0,6 tot 1,6 Liter per minuut. |Air consumption Ca. 200 Liter per minuut. |Workload 8 - 10 Bar. |Tank capacity 80 Liter. |

HBM 12 Volt 400 Liter Plastic Mobile Diesel Tank

With the HBM 12 Volt 400 Liter Plastic Mobile Diesel Tank you have your own gas station at hand. This mobile diesel tank is made of impact-resistant polyethylene (PE) and has a capacity of 200 or even 400 liters of diesel. Ideal for refueling your diesel generator, diesel heater or other diesel-fired equipment. This way you never have to drive your device to the nearest gas station or carry jerry cans and pour into the small tanks. The tank has recesses on the bottom that allow you to move it with a forklift or pallet truck. When the tank is empty, it is very light and therefore easy to lift. In addition, it is equipped with a 12V diesel pump that has an output of 40 liters per minute. This is operated with a full-fledged fuel nozzle, which is attached to a 2.5 meter long fuel hose for a sufficient range. The diesel tank can be locked with a padlock and the fuel hose can remain outside the tank when the lid is closed. Advantages of the HBM 12 Volt 400 Liter Plastic Mobile Diesel Tank: Made of impact resistant polyethylene (PE) Contents of 200 or 400 liters of diesel Cut-outs on the bottom for forklift or pallet truck 12V diesel pump with an output of 40 liters per minute Filling pistol on 2.5 meter long fuel hose Can be closed with a padlock The HBM 12 Volt 400 Liter Plastic Mobile Diesel Tank is a very neat and safe solution for the storage and distribution of your diesel. Order today and enjoy your own gas station!

Weber oil collection container with suction function 85 L

The Weber oil collection container with suction function 85 L is a convenient and efficient way to collect and dispose of oil. With a tank capacity of 85 liters and an oil discharge rate of 1.8-3 liters per minute, this oil drain pan is ideal for use in garages, workshops and car maintenance shops. Specifications: Tank capacity: 85 liters Oil discharge rate: 1.8-3 liters per minute Oil discharge pressure: 1 bar Minimum-maximum height (without oil drain pan): 1070-1610 mm Working pressure / Extraction: 4-6 bar Working temperature: 40-60°C Weight: 27 kg Dimensions (LxWxH): 470 x 470 x 1010 mm This oil drain pan is easy to use and clean. Thanks to its compact size and light weight of 28 kg, the box is easy to move. The suction function allows you to drain the oil efficiently and without spilling. Order the Weber oil collection container with suction function 85 L now and complete your workshop!

HBM 12 Volt 330 Liter petrol pump with tank and lid

This is the ultimate petrol pump for anyone looking for power, reliability and ease of use! The HBM 12 Volt 330 Liter petrol pump with tank and lid is a real asset to any garage or workshop. Voltage: 12 V Current: 15 A Power: 180 W Tank capacity: 330 L Flow rate: 57 ltr/min Dimensions: 1160 x 820 x 715 mm Net weight: 62 kg With its impressive flow rate of 57 litres per minute and its large tank capacity of 330 litres, this petrol pump ensures that you will never run out of fuel again. Its compact dimensions make it easy to place in any space and its net weight of 62 kg ensures stability and sturdiness. Whether you are a professional mechanic or just looking for a convenient solution for refueling your vehicles, the HBM 12 Volt 330 Liter petrol pump with tank and lid is the perfect choice!

Beta oil drip tray, mobile, with 90 liter tank, 1877

Thanks to the impressive 90-litre tank of the Beta oil sump 1877, you are always prepared for various applications. The handy level indicator ensures that you can always keep an eye on the level. The large diameter of the sump, with grid, not only offers a large capacity of 12 litres, but also ensures efficient oil collection. With the pneumatic emptying of the tank via the 1.8 meter hose, emptying becomes a quick and hassle-free process. The oil sump even has a handy tool tray, so that all the necessary items are within reach while working. Moving is easy thanks to the mobile function. 90 litre capacity Handy level indicator 12 litre capacity with grid Pneumatic emptying via 1.8 meter hose Handy tool tray

Beta oil collection and extraction unit, mobile, with 90 l tank and sight glass, 1877A

The Beta oil collection and extraction unit, mobile, with 90 liter tank and sight glass, model 1877A is the perfect solution for efficient and problem-free oil disposal. With a generous capacity of 90 liters this oil collection unit is perfect for professional use. 90 litre capacity for impressive storage space Level indicator for easy monitoring of filling status Large diameter and handy grid for even more capacity Large sight glass with 9.5 litre capacity for a clear view of collected liquid 1.8 metre long suction hose and pneumatic emptying function for easy emptying of the tank Supplied with a tool tray for added convenience Includes hard and flexible probes, and adapters for popular car makes With the Beta oil drain pan 1877A you are assured of a versatile and user-friendly solution for draining oil. Order today and complete your workshop!

HBM fuel transfer pump

The HBM fuel transfer pump is an essential tool for both professional mechanics and DIYers who regularly work with oil and diesel. With its powerful motor and durable construction, this pump is capable of transferring fluids quickly and efficiently without hassle. Suitable for moving oil and diesel Sturdy and reliable construction Powerful motor for fast transfer Easy to use and maintain Versatile for various applications The HBM fuel transfer pump allows you to effortlessly transfer fuel from one container to another, saving time and energy. Whether you are a professional mechanic who regularly performs maintenance on vehicles, or a hobbyist who maintains your own cars, this pump is a valuable addition to your tool collection.

HBM oil drip tray 6.5 liters

The HBM Oil Drip Tray 6.5 Litre is the perfect solution for safely containing and managing oil and fluid spills in your workshop, garage or during maintenance work. With a generous 6.5 litre capacity, this drip tray provides ample space to contain oil and other fluids, significantly reducing the risk of environmental contamination. Generous 6.5 litre capacity. Ideal for containing oil and fluid leaks. Robust design and durable construction. Resistant to chemicals and abrasion. Forget about spills and leaks - with the HBM oil drip tray you are assured of a safe and clean working environment. Order today and benefit from the excellent quality and functionality of this handy product!

HBM oil drum collection tank for 2 drums - 120 liters

The HBM oil drum spill tray for 2 drums, 120 litres, is the perfect solution for collecting oil and other non-corrosive liquids. With this practical and safe spill tray you prevent leaks and create a tidy and safe workplace. Made of durable HDPE material, the tray is resistant to chemicals and UV radiation. The two shelves provide extra stability for the drums. Ideal for smaller work spaces, garages or industrial environments. Helps to comply with environmental regulations Provides reliable protection against spills and leaks Efficient, robust and easy to use With this drip tray you are assured of a safe and organized workplace, where you can work with peace of mind without having to worry about leaks. Invest in quality and protection with the HBM oil drum drip tray!

HBM 70 Liter Oil Collection System / Oil Extractor, Oil Remover Extra Low

This HBM 70 liter oil collection system / oil extractor with extra low height is the perfect tool for effortlessly removing oil from various engines. With the included probes you can easily remove oil via the dipstick, while you can easily read the amount you remove via the large sight glass. This oil collection tank can also be used as an oil collection tray and is easy to empty thanks to the compressed air connection. With the sturdy wheel set, this device is easy to move and store in your workshop or garage. This oil extraction system enables efficient oil removal by means of vacuum and has a capacity of 0.8 to 1.6 liters per minute. The air consumption is 200 liters per minute and the working pressure is 0.8 bar. The oil collection tank has a maximum tank capacity of 70 liters and is supplied including various adapters with flexible hose. Easily remove oil from engine blocks, cardan, cooling system and more Large capacity with a working pressure of 0.8 bar Easy to move thanks to the four smooth-running wheels Includes various probes and adapters for different applications

Oil collection unit 68Lt. MW Tools

Discover the practical and efficient 68Lt. Oil Collection Unit from MW Tools – the smart solution for quickly and safely collecting used mechanical lubricant oil in your workshop or garage. This unit combines ease of use with mobility and safety, so you're always prepared for maintenance jobs, big or small. Pneumatic emptying: Thanks to the innovative system, you can effortlessly empty the barrel with compressed air, without any hassle or mess. Clear oil level window: Always keep an eye on the oil level with the handy level indicator on the barrel. Maximum mobility: Two fixed wheels and two castors ensure that the oil collection unit can be moved smoothly and stably, even on busy work floors. Large capacity: With a 68-liter capacity, this unit is spacious enough for both smaller and intensive maintenance tasks. Safe and efficient: Suitable for direct draining and temporary storage of used oil – it keeps the workplace clean and prevents spills. Choose the 68Lt. Oil Collection Unit from MW Tools and experience the convenience of professional oil management with every maintenance service!

Fluid extractor 10.5 l MW Tools

Discover the convenience of the MW Tools 10.5L Fluid Extractor – the ideal solution for quickly and efficiently removing fluids from vehicles, machinery, and various installations. Whether you choose pneumatic or manual operation, this fluid extractor adapts effortlessly to your working conditions. Thanks to the generous 10.5-liter reservoir and smart pour spout, emptying the tank is easy and clean. Perfect for professional garages, workshops, and DIY enthusiasts who value reliability and efficiency. Dual action: Choose between powerful pneumatic suction or convenient manual operation, fully tailored to your needs. Large Capacity: The 10.5 liter reservoir provides ample space for quickly extracting oil, coolant, water and other liquids. Easy to empty: The integrated pour spout makes emptying the pump clean and hassle-free. Strong and Durable: Built with quality materials for long-term professional use. Versatile: Suitable for cars, motorcycles, boats, agricultural machinery and more. No electricity required: Always ready to use, regardless of location or power availability. Choose the 10.5 l MW Tools Liquid Extractor and experience maximum flexibility, power, and ease of use for all your liquid extraction jobs.