Others Products

HBM universal adhesive windows for the blast cabinet

Technical data of the Universal Paste windows. You need to stick this universal sticking window on the inside of the blasting cabin's window for protection. 33 x 15 cm. These are standard with the HBM 30 Blasting cabin. 40 x 30 cm. These are standard with the HBM 90 Blasting cabin. 55 x 25 cm. These are standard with the HBM 110, 220, 350 and 500 Jet cabin. 66 x 30 cm. These are standard with the HBM 990 Blast Cabin. 60 x 10 cm. These belong on the window that the TL beams HBM 350 and 500 Blastcabine. 90 x 26 cm. These belong on the window that the TL beams HBM 990 Blastcabine.

HBM universal set of gloves for blast cabinet

(1)

Technical data of the set HBM Universal set of gloves for blasting cabin. HBM Gloves Small, 50 cm long, suitable for the SBC 90. HBM Gloves Large, 60 cm long suitable for the SBC 110, 220, 350, 500 and 990. HBM Universal set of gloves for blasting cabin SBC 30

HBM Head Brush for SBC 28 Sandblasting Boiler

The HBM head brush for the HBM SBC 28 blasting kettle is a convenient spare head brush for when you are working with the SBC28 blasting kettle. The head brush with metal edge fits perfectly on the blasting gun of the SBC28, so that when you replace it you can immediately continue cleaning. Ideal for treating floors, walls and ceilings without unnecessary interruption. Main advantages Suitable as a spare head brush for the HBM SBC 28 blasting kettle Fits perfectly on the blasting gun of the SBC28 Quick and easy installation when replacing Convenient to keep working directly during blasting work Product features Brand: HBM Head brush with metal edge Suitable for use with the HBM SBC 28 blasting kettle Easy to remove and install on the blasting gun With the HBM head brush for the HBM SBC 28 blasting kettle, you always have a suitable replacement at hand. This allows you to continue removing dirt, rust and old paint layers without delay.

HBM Spot Blasting Gun with 2 kg grit and 2 nozzles, air consumption 160 l/min, nozzle 5 mm.

Air consumption Ca. 160 Liter per mintuut bij Ca. 6 Bar. |

HBM Blast Mask Model 1

(1)

The HBM Blasting Mask Model 1 is a practical product from the HBM brand. This blasting mask is suitable for use in applications where a mask model is desired and is a clear addition to your work equipment. Thanks to its simple design, it is a recognizable and functional product for anyone looking for an HBM blasting mask. Main benefits Product from the HBM brand Suitable as a blasting mask for various applications Practical and simple model Product features Brand: HBM Product name: HBM Blasting Mask Model 1 EAN code: 7435125142145 With the HBM Blasting Mask Model 1, you choose a clearly described product from a well-known brand. A neat and functional choice for anyone specifically looking for a blasting mask with the assurance of HBM.

HBM Microfilter for dust extractor.

Inside diameter 9.5 cm. |Outer diameter 17 cm. |Height 31.5 cm. |

HBM Spare Window for HBM Sandblasting Mask.

The HBM spare window for HBM blast mask is a practical replacement part for your blast mask. Ideal for replacing the window when your current one is due for replacement, so you can continue using your HBM blast mask. Main benefits Suitable as a spare window for the HBM Blast Mask Convenient replacement part for extra ease of use Original from the HBM brand Product features Product type: spare window Application: for HBM Blast Mask Brand: HBM EAN code: 7435125215290

Soda blast conversion kit for sandblasting pot MW Tools

Discover a versatile and environmentally friendly way to clean with the Soda Blasting Conversion Kit for your MW Tools sandblaster. This practical conversion kit easily transforms your blasting machine into a powerful soda blaster. Blasting with soda (sodium bicarbonate) is the ideal solution for gentle, thorough cleaning without the risk of damaging or warping surfaces. Environmentally friendly cleaning: The soda used is not harmful to the environment. Safe for people and nature – no harsh chemicals needed. Gentle yet powerful: Removes paint from metal, glass, plastic, chrome, rubber and much more. Carefully strip surfaces without damaging or deforming. Working efficiently: Less preparation thanks to the non-abrasive action of soda. In many cases, masking is no longer necessary before blasting. This conversion kit is ideal for a variety of applications, such as: Degreasing and removing paint from engine parts, carburetors and hydraulic parts Stripping car parts and rims Facade cleaning and graffiti removal Removing paint from furniture Cleaning patios and garden furniture (tile or wood) Applications in the food industry Choose the Soda blast conversion kit for MW Tools and enjoy a reliable, durable, and gentle blasting solution for all your DIY projects.

High pressure cleaning booth MW Tools

Discover the powerful MW Tools High-Pressure Cleaning Booth – the solution for intensive and thorough parts cleaning in any work environment. This practical and fully enclosed booth combines a heated degreaser with high pressure for maximum cleaning results, even on the most stubborn dirt. Heated cleaning up to 60°C : Ideal for effectively removing grease, oil and limescale deposits – even stubborn dirt doesn't stand a chance. Safe and clean work: The large viewing window, sealed design, and built-in ventilation keep splashes, dirt, and odors out of the workshop. Combination gun: Easily switch between powerful cleaning with liquid or precise drying with compressed air. Dry parts quickly and efficiently! Versatile: Suitable for bodywork, industrial, food, and maintenance applications. Use with various water-soluble cleaning agents. Ease of use: Equipped with an LCD display with adjustable thermostat, bright cabin lighting and easily accessible front opening. Comfort and control: Includes ergonomic rubber gloves, removable work grid and adjustable pressure gauge for the desired working pressure (5-8 bar). Large built-in fluid reservoir: 14 litre capacity, equipped with stainless steel filter and heating element for continuous use. Flexible positioning: The adjustable legs always ensure a stable setup – wherever you work. Supplied with: Adjustable thermostat with LCD display Combination gun for cleaning & drying Rubber gloves with great freedom of movement Removable work surface and stainless steel filter Air supply with adjustable pressure gauge Cabin fan (optionally connectable to exhaust hose) Stable legs – easily adjustable Experience the convenience and power of professional cleaning from now on. Suitable for companies that value efficiency, safety, and perfectly cleaned parts – with the MW Tools high-pressure cleaning booth, every project is completed quickly.

Universal turntable 380mm for blast cabinets MW Tools

Discover the convenience and versatility of the Universal Turntable 380 mm for Blasting Cabinets! This indispensable accessory is specifically designed for MW Tools cabinets and numerous other brands, allowing you to effortlessly rotate objects during the blasting process. With its robust construction and handy extras, this turntable not only makes your work easier but also much more efficient. Suitable for all types of blast cabinets: Fits seamlessly into MW Tools cabinets and is compatible with most other brands. Extra load-bearing capacity: Lightweight but strong enough to carry loads of up to 60 kg. Safe working: The base is provided with a durable plastic anti-slip layer, so that your workpiece remains firm and stable during blasting. Optimizes the blasting process: One hand movement is enough to effortlessly rotate your object for a perfectly smooth result. Versatile in use: Ideal for both professional and hobby applications. In short: the Universal Turntable 380 mm offers you control, convenience, and reliability for every blasting project. Complete your blasting cabinet and blast like never before!