Degreasing trays Products

HBM hollow cleaning brush with hose for degreaser tray

Total length 275 mm. |Length of the hose 700 mm. |

HBM hollow cleaning brush for degreaser tray

Total length 275 mm. |

HBM High Pressure Parts Cleaner With Thermostat

HBM High Pressure Parts Cleaner With Thermostat With the HBM high-pressure parts cleaner you can now clean all your car and motorcycle parts even better! Thanks to the high pressure (5 to 8 bar), you can rinse thoroughly with water and cleaning agent, even in hard-to-reach places such as deep bolt holes. The built-in thermostat heats the water to 50 degrees Celsius to loosen even the most stubborn grease. After cleaning, you can switch to dry air pressure to quickly dry and hose down the parts. Characteristics: Digitally readable and adjustable thermostat Large lockable flap Comfortable gloves Multifunctional cleaning sprayer LED-lighting Air fan Readable pressure gauge Adjustable air pressure regulator Removable cleaning grid Removable filter for dirt Removable water collection tray Adjustable legs Degreaser To make optimal use of this parts cleaner, we recommend using Eurol Cold Degreaser HF Plus. This degreaser can be heated up to 50 degrees Celsius, making it work effectively with the parts cleaner. Compressor requirements For the parts cleaner you need a compressor with a minimum working pressure of 8 bar, so that you can clean effortlessly with a working pressure of 5 to 8 bar. Technical specifications: Type: High Pressure Parts Cleaner Contents: 185 liters Minimum Compressor Capacity: 8 Litres Thermostat: Yes Air connection: Yes Pressure regulator: Yes Removable Collection Tray: Yes Dimensions: 77 x 60 x 133 cm Weight: 50 Kg

HBM loose pump for degreaser trays

Voltage 230 Volt. |Power 26 Watt. |Pump capacity 1,9 Liter per minuut. |Maximum pump height 1,8 Meter. |

Eurol cold degreaser hf plus 20 liters

(1)

Eurol® Cold Degreaser HF Plus 20 Liter is a strong cleaning agent with a low evaporation loss. It is an economical and biodegradable product with a pleasant smell. The pH is neutral making it suitable for all surfaces. The flash point is higher than 61 degrees, making it not ADR classified. Eurol® Cold Degreaser HF Plus 20 Liters is ideal for de-preserving new cars, cleaning engine parts, filters, machines, engine rooms, tanks, lift bridges, floors, etc. It is also suitable for cleaning greasy floors and walls. Plastics and rubbers are not affected during the short contact time. No greasy layer remains after rinsing with water. Advantages of Eurol® Cold Degreaser HF Plus 20 Liter: Powerful and economical in use Low evaporation loss Pleasant smell Suitable for all surfaces Not ADR classified Biodegradable

HBM 15 liter degreaser tray with pump

Contents of the bath 15 Liter. |Maximum fluid content 5 Liter. |Pump capacity 1,9 Liter per minuut. |

Eurol cold degreaser hf plus 5 liters

(1)

Are you looking for a powerful degreaser for fast and effective cleaning of machines, engine parts, filters, lift bridges, tanks, floors and walls? Then Eurol Cold Degreaser HF Plus is the perfect solution. This Eurol product is composed of highly effective emulsifiers and hydrocarbon solvents, which gives it an excellent degreasing effect and is suitable for many applications. Below you will find more information about the technical data and benefits of Eurol Cold Degreaser HF Plus: Technical Data of Eurol Cold Degreaser HF Plus Brand: Eurol Type: Cold Degreaser HF Plus Contents: 5 Liters Composition: Strong emulsifiers and hydrocarbon solvents with a low evaporation loss Applications: For the quick deconservation of new cars, cleaning of engine parts, filters, machines, engine rooms, tanks, lift bridges, floors, etc. Advantages: Suitable for all surfaces, has a pleasant smell, is economical in use, biodegradable and has a relatively low evaporation rate Eurol Cold Degreaser HF Plus is a multifunctional degreaser that is suitable for many applications. The product should be used pure and has a pleasant smell, which makes its use even more pleasant. Moreover, Eurol Cold Degreaser HF Plus is economical in use and the cleaned parts can easily be rinsed with water. Plastics and rubbers are not affected during the short contact time, which makes the product suitable for many surfaces. Eurol Cold Degreaser HF Plus has a pH-neutral formula and is therefore suitable for all surfaces. In addition, the product evaporates relatively slowly and is biodegradable. The flash point is higher than 61 degrees, which means that Eurol Cold Degreaser HF Plus is not ADR-classified. This means that there are no stricter storage requirements for this product with regard to the PGS-15 successor to the CRP 15 guideline for the storage of dangerous goods. In short, with Eurol Cold Degreaser HF Plus 5 Liter you have a powerful degreaser that is suitable for many applications and is safe to use. Order this product today and take advantage of the many benefits that Eurol Cold Degreaser HF Plus has to offer!

Eurol cold degreaser power cleaner bio 2000 - good for 50 liters!

With the Eurol Cold Degreaser Power Cleaner Bio 2000 you have a highly concentrated cleaning agent with a very high cleaning power for a wide range of applications. It is suitable for cleaning hard surfaces such as metal, paint, plastic and more. This product is from the Eurol brand and contains no less than 50 liters of cleaning power. Features and benefits Handy and robust spray bottle with infinitely adjustable spray head Suitable for motorcycles, engines, engine compartments, racing, cross and touring bikes, walls, floors, ship decks, garden furniture and caravans Ideal for cleaning hard to reach parts Contains undiluted product, use only after application on hard surfaces. Avoid eye and skin contact with the pure product! Can be mixed with both cold and warm water, depending on the pollution, a dosage of 1:400 to 1:10 is recommended Meets the highest environmental requirements, is readily biodegradable and non-toxic Phosphate-free, and depending on the contamination can also be used undiluted Water-thin non-flammable liquid Even more applications are possible because Eurol® Power Cleaner Bio 2000 is supplied in bulk packaging. For example, you can clean freight and passenger cars, buses, trams, ships, metros and railway wagons. Warm water is recommended for heavily soiled parts, especially for heavy algae deposits. This powerful cleaning agent is the ultimate tool in your cleaning crate. Order the Eurol Cold Degreaser Power Cleaner Bio 2000 now and make your living environment as new again.

HBM 176 liter degreaser tray with pump

Dimensions 115 x 56 x 90 cm. |Dimensions of the bath 113,5 x 54,5 x 32 cm. |Contents of the bath 176 Liter. |Maximum fluid content 40 Liter. |Pump capacity 1,9 Liter per minuut. |

HBM 90 liter mobile degreaser tray with pump

Overall dimensions 105 x 54 x 92,5 cm. |Dimensions of the bath 71 x 48 x 20 cm. |Contents of the bath 90 Liter. |Maximum fluid content 40 Liter. |Pump capacity 1,9 Liter per minuut. |

HBM 90 liter degreaser tray with pump

Overall dimensions 78 x 54 x 88 cm. |Dimensions of the bath 71 x 48 x 26 cm. |Contents of the bath 90 Liter. |Maximum fluid content 40 Liter. |Pump capacity 1,9 Liter per minuut. |

HBM xh - mc degreaser tray with pump and lighting

(1)

Overall dimensions collapsed 56 x 26 x 630 cm. |Maximum fluid content 15 Liter. |Pump capacity 1,9 Liter per minuut. |

Parts cleaner 75L MW Tools

The MW Tools Parts Cleaner 75L is the ideal solution for professional cleaning and degreasing of parts in your workshop. Specially designed for use with water-based degreasers, this powerful device combines efficiency with safety and ease of use. Spacious foot-mounted model: The robust tank with a capacity of no less than 75 litres offers plenty of work space for cleaning various parts. Circulation system: The cleaning fluid circulates continuously within the device, efficiently removing grease and dirt. Emptying the fluid is easy thanks to the convenient drain plug. Safety first: Equipped with a fuse to prevent ignition of the fluid during cleaning. You can always work with peace of mind. This product comes with everything you need for immediate use: Sturdy reservoir for the cleaning fluid Built-in powerful liquid pump Flexible metal hose for maximum mobility Choose the Parts Cleaner 75L MW Tools and experience worry-free cleaning with maximum efficiency and safety in your workshop!

Mobile welding fume and oil mist extraction 2000M³/h 1.3KW 230V MW Tools

Discover the ultimate solution for a clean, safe, and efficient work environment with the MW Tools 2000m³/h 1.3KW 230V Mobile Welding Fume and Oil Mist Extractor . This powerful mobile filtration system is specifically designed to effectively remove welding fumes, harmful vapors, and oil mist, allowing you and your employees to work in a fresh and healthy atmosphere. Its compact design and flexible options make this filter unit perfect for any workplace where mobility and top performance are required. Dual filter function: This filter unit efficiently filters fumes from all welding processes, including MIG, TIG, spot welding, laser welding, and robotic welding. It also effortlessly removes oil vapors and mist from various machining operations such as grinding, turning, milling, and CNC machining. High filtration degree: With a 4-stage filtration system – including fireproof stainless steel filter, HEPA filter (0.5µm), carbon filter for odor control and an oil mist filter – even the finest dust and harmful aerosols are removed with an efficiency of up to 99%. Advanced filter cleaning: The filters are automatically cleaned with a powerful compressed air pulse. A push button on the control panel allows you to easily start the cleaning process, and the removable 20-liter steel dust container makes maintenance easy. Compact & mobile: With a footprint of just 55x77 cm and four swivel castors (with brakes), this unit is exceptionally space-saving and can be used anywhere. Rotating extraction arm: A 3-metre long, 360° freely rotatable arm with a heat-resistant hose and a robust plastic extraction nozzle provides ultimate flexibility in your workspace. Easy to use: The extraction speed is infinitely adjustable thanks to the variable servo motor (1.3 kW, 1300-5600 rpm), which optimises noise and power consumption. Useful features: Large filter surface of 15 m² for maximum air purification Overload protection for maximum safety Stainless steel filter easy to clean with water Recirculation of purified air directly back into the workshop Suitable for non-ATEX environments 5 meter power cord with plug included Choose a clean and safe work environment with the MW Tools mobile welding fume and oil mist extraction system. Designed for maximum performance, flexibility, and ease of use – essential for any professional workshop!