Workplace equipment Products

HBM 6-layer shelf storage brackets, storage rack

(3)

The HBM 6 Layer Shelf Storage Brackets are a must-have for every workshop, garage or shed. The storage rack creates generous storage space for wood, pipes and other long items. It can be mounted both indoors and outdoors on fences, walls, etc. Technical data of the HBM 6 Layer Planks Storage Brackets, storage rack: Capacity - maximum load: 50 kg per level. Material - primary construction: Steel. Number of shelves: 6 Levels. Height: 1038mm. Length: 300mm. Weight: 7.49 Kg. Width: 300mm. The HBM 6 Tier Shelf Storage Brackets are easy to install and come with 12 racks, 12 end caps, 12 1/14" pan head screws 6 gauge, 2 posts and 6 spacers. With these storage brackets you create the ultimate storage space and keep your workshop, garage or shed organized and tidy.

HBM large funnel 4 liters

Content 4 Liter. |Dimensions 28 x 19 x 29,5 cm. |

HBM professional storage trays

All our products have a warranty of at least 1 year.

HBM High Pressure Airless Spraying Machine Paint Sprayer Wall Spraying Machine Set 1010 Watt

(5)

Do you want to apply wall paint to walls quickly and without streaks? This is easy with the HBM High Pressure Airless Spraying Machine Paint Sprayer Wall Spraying Machine. This special device sprays all types of sprayable wall paint without any problems on walls and walls under very high pressure through a ten meter long hose. Thanks to the sturdy metal stand, you can place the sprayer anywhere and it is an asset for both professional painters and DIY enthusiasts. The nozzle can be used both horizontally and vertically and it is possible to place various nozzles in the nozzle. The silicone inlet hose has a large, weighted suction mouth with filter at the end, so that no hard paint particles are sucked in. Suitable for both professionals and DIY enthusiasts Spray all types of sprayable wall paint on walls and walls without any problems Maximum output: 1.5 liters per minute Maximum spray pressure: 3000 PSI / 206 bar Dimensions: 38.5 x 27 x 43 centimeters Product specifications Power: 1010 Watts Maximum output: 1.5 liters per minute Maximum spray pressure: 3000 PSI / 206 bar Dimensions: 38.5 x 27 x 43 centimeters

HBM 63 liter concrete mixer, concrete mixer

(7)

Nominal Voltage 230 Volt, 50 Hz. |Engine power 650 Watt. |Drum speed 27,5 O/min. |Drum content 63 Liter. |Drum opening diameter 267 mm. |Material Staal. |Overall dimensions 110 x 55 x 93,5 cm (L x B x H) |

HBM 230 volt electric diesel pump, fuel oil pump 550 watts

(1)

Engine power 550 Watt. |Voltage 230 Volt. |Engine speed 2800 O/min. |Pump capacity 60 Liter per minuut. |Maximum suction lift 5 Meter. |Maximum pump height 10 Meter. |

HBM 250 kg. record roller

(1)

Maximum capacity 250 Kg. |Clamping range Verstelbaar van 0 tot 23 cm. |Dimensions of the wheels 80 x 250 mm. |

HBM Baking cabinet, Storage system, Shelving with 60 Storage bins

(1)

HBM Technical data of the HBM Bin Cabinet, Storage System, Rack with 60 Storage Bins. Total dimensions: 78 x 32 x 167 cm. External dimensions of the containers: 10 x 29.5 x 10.5 cm. Distance between the shelves: 12.5 cm. Packaging dimensions: 42 x 34 x 93 cm. Weight: Approx. 30 kg. Note: dividers not included!

HBM 9 kg. 770 mm. pick up magnet / chip catcher

Total length 770 mm. |Capacity 9 Kg. |Diameter of the head 128 mm. |

HBM car tires and motorcycle tires disassemble device

(6)

HBM Car tires and motorcycle tires disassemble device Changing tires has never been so easy with the HBM car tires and motorcycle tires demounting device! Ideal for the do-it-yourselfer, this fully manual device makes changing tires easy to do yourself. The device is suitable for motorcycle and car tires from 4 to 16.5. How does a tire dismounting device work? Using the push bar at the bottom of the device, you can easily remove the tire from the rim. Do this all the way around on both sides. The push rod is adjustable in height by a locking pin. Then fix the rim on three hooks on the top of the device. With the tire iron, you flip the tire all around over the rim due to the lever effect. You do this on both sides and the tire is off the rim. Technical data: Suitable for motorcycle and car tires from 4 to 16.5 Completely manual With the HBM car tires and motorcycle tires dismantling device, changing tires is now a piece of cake!

HBM a gearbox jack, transmission jack

(2)

Capacity 500 Kg. |Minimum height 105 cm. |Maximum height 182 cm. |

HBM electric barrel pump for adblue and water-based liquids

(2)

HBM Electric Drum Pump for Adblue and Water Based Liquids HBM has designed an electric drum pump that is suitable for removing AdBlue liquids from the reservoir and is also suitable for water-based liquids such as antifreeze and windscreen fluid. Cost-saving and simple-operating suction pump Capacity of 20 liters per minute Suitable for plastic barrels of 205 liters / 45 US gallons Inlet mouth (hole) of barrel must be larger than 55 mm diameter Dual power supply: mains power or 12 volts Flow rate / flow of 20 liters / (5 gallons per minute) Supplied with 3 m hose and swiveling dosing opening (ISO 22241 compliant) With this barrel pump from HBM you get a high-quality product. This pump is easy to use and saves you costs. Thanks to the capacity of 20 liters per minute, this drum pump is suitable for plastic drums of 205 liters / 45 US gallons. The inlet mouth (hole) of the vessel must be larger than 55mm diameter. The HBM Electric Drum Pump for Adblue and Water Basic Liquids can be powered via mains power or 12 volts. In addition, this barrel pump is suitable for removing AdBlue fluids from the reservoir and also for water-based fluids, such as antifreeze and windshield fluid. This product is supplied with a 3 meter hose and swiveling dosing opening (ISO 22241 compliant). Order the HBM Electric Drum Pump for Adblue and Water Basic Liquids now and save time and money!

HBM 120 cm. hobby workbench with mdf sheet

Overall dimensions 122 x 61 x 90 cm. ( Lxbxh ) |Dimensions of the worktop 120 x 60 cm. |Thickness of the worktop 12 mm. |

HBM stainless steel oil drip plate, drip tray, oil collecting tray 600 x 400 x 48 mm.

(1)

The HBM Stainless Steel Oil Drip Plate is ideal for collecting oil while storing your car or while doing tinkering. The dimensions of the drip tray are 600 x 400 x 48 mm, which provides sufficient space for collecting oil. The drip plate is made of SS201 stainless steel, making it durable and wear-resistant. The material is also easy to clean, making it easy to clean the drip plate after use. This ensures a longer lifespan of the drip plate. Characteristics: Dimensions: 600 x 400 x 48 mm Ideal for storing your car or while tinkering Made from SS201 stainless steel Easy to clean

HBM 3 meter telescopic washing brush with water connection

This washing brush from the HBM brand is ideal for cleaning cars, vans, caravans, trailers, bicycles and other vehicles and objects around the house. The brush is lightweight and easy to use because of the extendable handle that extends up to 3 meters and is equipped with a comfortable handle. Important instructions Only use this product with cold water to avoid burns. Avoid power lines and wires. First remove the coarse dirt with water to prevent damage to the brush and the cleaning surface. The washing brush is easy to connect to your water supply, so that you can start your cleaning job immediately. Thanks to the brush, you can clean in a targeted and efficient way. The water supply is easy to regulate with the on/off button on the handle. With the HBM 3 Meter Telescopic Washing Brush With Water Connection you are therefore able to quickly and thoroughly clean your vehicles and other objects around the house. Order this product today for a competitive price and make the job easier and more fun!

HBM portable winch, hoist and pull hoist drilling machine powered 225 kg red

(2)

Specifications: Maximum load: 500 kg Maximum pulling force: 255 kg Steel cable: 4 mm x 12 mtr The HBM portable winch, lifting and pulling hoist drilling machine is the perfect solution for all your lifting and pulling activities. With a maximum load of no less than 500 kg and a maximum pulling force of 255 kg, this winch is suitable for heavy applications. The steel cable has a diameter of 4 mm and is 12 meters long. This gives you enough cable to safely move the object you want to lift or pull. The winch is executed in a striking red color, making it easy to recognize in the workplace. The compact design makes this portable winch easy to transport and store. The winch can be operated manually, but is also suitable for connection to a drilling machine. As a result, you always have sufficient power to carry out your hoisting or pulling activities safely and efficiently. In short, with the HBM portable winch, hoist and pull hoist drilling machine powered 225 kg red you always have a reliable solution for all your hoisting and pulling activities. This way you can get started with your job quickly and safely!

HBM magnetic spray can holder

With the HBM Magnetic Spray Can Holder you are assured of a simple and luxurious solution for storing your spray cans and bottles. This product is an additional option for the tool trolleys used by many garages. Thanks to this tool holder you can easily and quickly have all spray cans within reach. Characteristics of the HBM Magnetic Spray Can Holder Sheet steel product with powder coating and 8 magnets Suitable for almost any spray can or bottle with a maximum diameter of 75 mm Holds up to 3 spray cans or bottles and 7 screwdrivers: 2x diameter 11.5mm 2x diameter 10.5mm 1x diameter 9.5mm 1x diameter 8mm 2x diameter 7mm This spray can holder is therefore not only suitable for spray cans, but also for screwdrivers. The magnetic action guarantees that your tools stay firmly in place. HBM: A Reliable Guarantee The HBM Magnetic Spray Can Holder is manufactured by the renowned HBM brand. With a reputation for reliability and quality, you can be assured of a product that will meet all your expectations. The powder coating guarantees that the product is strong, durable and will last for a long time. Order the HBM Magnetic Spray Can Holder now and enjoy an organized and quick solution for your tools. This product is a must-have for every garage and ensures efficiency and convenience in your daily work.

HBM plastic measuring cup 1 liter

Diameter 120 mm. |Height 160 mm. |Content 1 Liter. |Reading ML en OZ. |

HBM Portable Electric Adblue Pump With 50 Liter Tank

(2)

The HBM portable electric Adblue pump with 50 liter tank is the ideal solution for international journeys where you never want to run out of Adblue. The compact tank fits easily in the back of a luxury car and is of course also suitable for vans and trucks. With this portable pump you can dose liquid accurately and you are not required to have an ADR. Technical data Voltage: 12V Current: 10A Power: 120W Tank capacity: 50L Flow rate: 17 L/min Duty cycle: 30 min on / 30 min off Dimensions: 57 x 38 x 45 cm Weight: 12 kg The HBM Portable Electric Adblue Pump With 50 Liter Tank is supplied with an electric pump, 12V, electric cable (4m), hose clamps, and a 2.5m supply hose with fuel pipe.

HBM 1500 x 30 mm. impact iron

(1)

Total length 1500 mm |Diameter 30 mm |

HBM oil drip tray 110 x 60 cm

Dimensions 110 x 60 cm. |Height 4 cm. |Material Polyethyleen. |

HBM cement spray gun, mortar spray gun

(1)

This stainless steel mortar funnel gun is suitable for spraying different types of mortar, glass fiber reinforced concrete and other materials. Can be sprayed in a coarse 3 mm. grain up to 2.5 cm thick structural layers. It can also be used for applying other mortars such as exterior wall insulation mortar or loam. Most important features: Funnel made of stainless steel Installed 4-hole spray plate is easy to slide aside, remove and clean Swivel joint between handle and hopper for easy working Spray: Sand / cement slurries, sprayable mortars, grout, glass fiber reinforced concrete, fire resistant mortars and other materials Recommended compressor 340 liters per minute at 6.9 BAR

HBM 2 Ton High Axle Support Adjustable From 124 to 215 cm.

Technical data of the HBM 2 Ton High Axle Support Adjustable From 124 to 215 cm Maximum capacity 2000 kg. Minimum height 124mm. Maximum height 215mm.

HBM 4000 kg. hand lever hoist

Capacity 4000 Kg. |Cable length 300 cm. |Cable diameter 6 mm. |Number of hooks 3. |Dimensions 78 x 10 x 11 cm. |

CFH gas can at3000

The CFH Gasbus AT3000 is a special gas mixture that is extra powerful and suitable for higher temperatures. The canister has a capacity of 330 grams or 600 ml. This gas mixture is specially designed for use in combination with the Lasfix SF3100. Brand: CFH Characteristics: Special gas AT 3000 Extra powerful mixing gas Suitable for higher temperatures Contents: 330 grams, 600 ml Designed for use with the Lasfix SF3100 Order the CFH Gasbus AT3000 today for all your welding work and benefit from the extra power and higher temperatures that this gas mixture offers.

HBM Folding Bench Attachment For Workshop Press 305 x 5 mm.

With the HBM Bender Attachment For Workshop Press 305 x 5 mm you can bend metal plates in an easy and accurate way. This high quality attachment has been specially designed for use with a workshop press and has a maximum bending range of 305mm and a maximum bending thickness of 5mm. Characteristics: Suitable for use with a workshop press Maximum bending width of 305 mm Maximum bend thickness of 5 mm for aluminum and 6.4 mm for stainless steel High quality construction for long life Easy and accurate to use Weighs only 10 kg Technical data: Maximum bending width: 305 mm Maximum bending thickness aluminum: 10 mm Maximum bending thickness of stainless steel: 6.4 mm Weight: 10 kg Packaging dimensions: L 42 x W 24 x H 11 cm The HBM Bender Attachment For Workshop Press 305 x 5 mm is an indispensable tool for anyone who regularly bends metal plates. The attachment is easy and accurate to use and has a high-quality construction for a long service life. With a maximum bending width of 305 mm and a maximum bending thickness of 5 mm for aluminum and 6.4 mm for stainless steel, you can bend a wide variety of plates with this attachment. Order today and benefit from our fast delivery and excellent service. The HBM Bench Attachment For Workshop Press 305 x 5 mm comes with all necessary parts and has a weight of only 10 kg, so you can easily move and store it. This high-quality attachment allows you to bend sheet metal quickly and accurately, allowing you to work more efficiently and achieve better results.

HBM Professional Electric Diesel Pump , Fuel Oil Pump With 100 Liter Tank

(1)

With the HBM Professional Electric Diesel Pump, Fuel Oil Pump With 100 Liter Tank you can quickly pump diesel or fuel oil without moving your vehicle. This mobile electric fuel pump has a sturdy polypropylene storage tank with a capacity of 100 liters and a 12 Volt electric pump with which diesel or fuel oil can be pumped quickly. The pump can easily be connected to a 12V battery using the supplied battery clamps. The aluminum handle of the filling nozzle is equipped with a hands-free function that shuts off the supply of the liquid as soon as the liquid level hits the nozzle, just like at the gas station. A transparent hose to the vessel is mounted on the suction side of the pump, so that any air bubbles in the liquid can be clearly observed. The pump has an output of 40 liters per minute, which means that the entire contents of the tank can be emptied within two minutes. The pump is fitted with a liquid proof switch to prevent oil or fuel from entering and creating a fire hazard. Technical data Tank capacity: 100 litres Voltage: 12 Volts Capacity: 40 liters per minute Length of the dispensing hose: 400 cm Total dimensions: 90 x 45 x 48 cm The HBM Professional Electric Diesel Pump, Fuel Oil Pump With 100 Liter Tank is extremely shock resistant and made of strong polyethylene. This pump offers reliable and efficient storage of Diesel in the workshop, on the move, breakdown assistance, etc.

HBM barrel pump for adblue and water-based liquids

The HBM Barrel Pump is a manual pump that is suitable for use with AdBlue, ammonia and various liquid fertilizers in the agricultural industry. The pump is made of Nylon and EPDM seals and is supplied with a telescopic suction rod that fits 60 or 200 liter drums. The pump is also supplied with a flexible discharge hose for filling the tank or smaller containers. Scope of application This pump is suitable for use with AdBlue, water-based media, cleaning agents, soaps, windscreen washer fluid, hydraulic oils, herbicides and pesticides. Consists of: Pump Adjustable suction tube from 98 to 120 cm. for use with 50 - 205 liter drums Flexible, ribbed 3/4" drain hose of 2 meters Characteristics Siphon drum pump A breather cap is mounted on the pump outlet, which interrupts the siphoning effect when loosened Wet components polyacetal, polypropylene, polyethylene, and vitron Technical information Flow rate per stroke: 320 cc Weight: 1300 grams Please note: these pumps should not be used for pumping fuels, solvent thinners, etc.

HBM 5 liter oil can

(2)

With the HBM 5 Liter Oil Can you can easily and safely store and transport liquids. This oil can has a sturdy lid and a handy pouring spout, allowing you to dose accurately. Closed oil can with lid and spout Made of high quality white polythene Includes sturdy lid for protection against dust Removable spout with seal Protects liquids against contamination Prevents the risk of leaks The HBM 5 Liter Oil Can is ideal for use in workshops, garages and warehouses. Order today and benefit from the useful functionalities of this high-quality oil can from the HBM brand.

HBM adjustable construction prop with automatic locking 115 - 290 cm - 30 kg

(2)

The HBM Adjustable Building Prop with Automatic Locking is the ideal solution for supporting temporary structures and creating enclosed workspaces. It is a height-adjustable building prop with a simple, one-handed ratchet system and rotating panels. Fine-tuning swivel end cap to suit any surface Suitable for any surface Adjustable from 1.15 to 2.9 meters Maximum vertical capacity of 40 kg Plate dimensions of the stamp: 125 x 75 mm Equipped with automatic locking The building stamp is perfect to use in combination with polythene sheets to create a closed workspace. Thanks to the automatic locking, you don't have to worry about the safety of the construction, because the prop locks automatically as soon as it is at the right height. The HBM Adjustable Building Prop with Automatic Lock has a maximum capacity of 30 kg and is perfectly suited for supporting temporary structures such as walls, ceilings and timber frame construction. This building prop is designed for years of trouble-free use on the construction site.