Bench Screws and Anvils Products

HBM professional long glue clamp / t-clamp

(2)

Long Glue clamp - T - clamp with painted finish. Cast iron heads and feet. For applying high pressure. Technical data of the HBM Professional Long Glue Clamp / T-Clamp These clamps are available in 3 different lengths Maximum clamping capacity 410/770/1070/1370/1670 mm.

HBM folding jaws for in the vice

(1)

Technical data of the HBM Zetbek for the vice. Magnetic jaws for the vice. For setting sheet steel up to 3 mm. fat.

HBM Professional Mini Anvil 500 g 112.5 x 30 x 42.5 mm

(1)

Dimensions 112,5 x 30 x 42,5 mm. |

HBM Anvil on Base 3 kg 195 x 40 x 40 mm

Total weight 3 Kg. |Total height 130 mm. |Base diameter 125 mm. |

HBM Sheet Rolling Attachment for Bench Vise 2.5 x 300 mm, Rolling Rolls 32 mm

(1)

Maximum working width 300 mm. |Maximum rolling capacity over the entire working width 2,5 mm. |Diameter of the rollers 32 mm. |

HBM 75 mm Steel and Nylon Anvil in Rubber Holder 3 x 10 cm

The HBM 75 mm Steel and Nylon Anvil in Rubber Holder is a compact and practical solution for tasks where a stable surface is desired. Thanks to the combination of steel and nylon, this anvil offers versatility in use, while the rubber holder provides extra support. With its handy size, this HBM anvil is suitable for a wide range of applications. Key benefits Steel and nylon design for versatile use Equipped with a rubber holder for extra support Compact size, easy to place and store Product features Brand: HBM Length: 10 cm Width: 3 cm EAN: 7435125061088

HBM aluminum top jaws for the vice

Magnetic jaws.

HBM 4-Piece Aluminum Attachment Jaw Set For use in a vice

Technical data of the HBM 4-piece aluminum jaw set for the vice. 1 x Set of grooved rubber clamping surfaces. 1 x Set with fiber clamping surfaces. 1 x Set with horizontal V. 1 x Set with horizontal and 3-fold vertical V. 1 x Storage case. These aluminum magnetic jaws are equipped with rubber clamping surfaces in which grooves have been made. These grooves not only provide more grip, but also allow you to clamp round or polygonal objects. The magnets of these attachment jaws are milled at the back and consist of iron oxide magnet strips (iron oxide powder mixed with rubber). These magnetic strips have the advantage that they are not brittle or breakable (unlike rare-earth or neodymium magnets). This means that these magnets can never lose small splinters, which can then end up between your machine clamp (or vice) and the attachment jaw, causing them to no longer fit together properly. The magnetic force of these iron oxide rubber strip magnets is also such that the attachment jaws are properly pulled towards the clamp (or vice) without magnetizing your workpiece.

HBM Hand Vice Model 4, Maximum Opening 8 mm.

Jaw width 8 mm. |Maximum opening of the pelvis 2,5 mm. |Total length 130 mm. |

HBM Hand Anvil for Metal

Sizes 100 x 100 x 35 mm. |

HBM aluminum top jaws with double f

Magnetic jaws with a horizontal and vertical V in the jaws.

HBM Superjaws Portable Clamping System - Bench Vice.

The HBM Superjaws Portable Clamping System - Vise is a powerful and practical clamping system for securely fastening a wide range of workpieces. Thanks to its high clamping force, wide clamping range and stable construction, this portable clamping system offers optimal control while working. Ideal for anyone looking for a sturdy and reliable vise with maximum freedom for both hands. Main advantages Powerful 1000 kg clamping force for controlled and secure fixation Reversible sliding jaw with extra-wide 956 mm clamping capacity Foot operation keeps both hands free for optimal control over the workpiece Extra-wide tripod base for maximum stability during use Strong steel construction with powder coating for a long service life Product features Brand: HBM Type: portable clamping system / vise Clamping force: 1000 kg Clamping capacity: 956 mm Construction: steel with powder coating EAN code: 7435125540545 With the HBM Superjaws Portable Clamping System, you choose a stable, strong and practical solution for securely clamping workpieces. A versatile vise designed for ease of use, control and long-lasting reliability.

HBM aluminum top jaws with rubber

Magnetic jaws covered with rubber.

HBM 150 mm Cabinetmaker vice

The HBM Furniture Makers Vise is a high-quality bench vise that is perfect for any woodworking project. With a cast iron frame and chrome plated screw handle, this vise is durable and efficient. Most important features Can be mounted on any workbench Can be mounted on top and bottom of the workbench for light clamping work Cast iron frame with chrome plated screw handle Alignment bars Maximum opening of 125 MM Not rotatable Mounting: Screw With this furniture maker's vice you can work easily and accurately. The maximum opening of 125 mm makes it possible to clamp different types of materials, while the stable frame and screw handle ensure that the vice remains firmly fixed while working. Whether you are a professional woodworker or simply enjoy doing odd jobs at home, the HBM Furniture Makers Vise is an excellent choice. Mount this vice on your workbench and get started!

HBM Aluminum Top Jaws with Rubber for Extra Grip For in the bench vice

HBM Aluminum magnetic top jaws with Rubber clamping surface for in the vice. These aluminum magnetic top jaws are provided with rubber clamping surfaces in which grooves have been made. These grooves not only provide more grip, but also the possibility to clamp round or polygonal objects. The magnets are milled into the rear of these jaws and consist of iron oxide magnetic strips (iron oxide powder mixed with rubber). . These magnetic strips have the advantage that they are not brittle or fragile (unlike rare-earth or neodymium magnets). As a result, these magnets can never lose small splinters, which can then end up between your machine clamp (or vice) and the top jaw, causing them to no longer connect properly. The magnetic force of these iron oxide rubber strip magnets , is also such that the top jaws are properly pulled towards the clamp (or vice) without magnetizing your workpiece. These magnetic top jaws are available in the following widths: 100 mm - Item no. 9890. 125 mm - Item no. 9891. 150 mm - Item no. 9892.

HBM Swiveling Bench Vise with Table Clamp 60 mm - Max. Opening 50 mm.

Jaw width 50 mm. |Maximum opening of the pelvis 60 mm. |Maximum opening of the table clamp 50 mm. |

black steel professional steel vises with pipe clamp

Jaw width 100 mm. |Base diameter 165 mm. |Maximum opening 140 mm. |HOH mounting size 140 mm. |Unloading 65 mm. |Dimensions 420 x 155 x 180 mm. |Dimensions of the anvil section 55 x 30 mm. |Jaw width 200 mm. |Base diameter 125 mm. |Maximum opening 205 mm. |HOH mounting size 125 mm. |Unloading 80 mm. |Dimensions 320 x 105 x 155 mm. |Dimensions of the anvil section 85 x 45 mm. |Jaw width 125 mm. |Base diameter 178 mm. |Maximum opening 145 mm. |HOH mounting size 150 mm. |Unloading 75 mm. |Dimensions 430 x 200 x 195 mm. |Dimensions of the anvil section 70 x 35 mm. |Base diameter 150 mm. |Dimensions 380 x 130 x 175 mm. |Jaw width 150 mm. |Maximum opening 190 mm. |Dimensions of the anvil section 75 x 40 mm. |

HBM 115 mm Vice with Pipe Clamp, Width 50 mm, Length 45 mm, Reach 55 mm.

The HBM 115 mm. vise with pipe clamp is a compact and practical vise for securely clamping workpieces and pipes. Thanks to its well-considered design, this is a convenient choice for various tasks where stability and grip are important. Main benefits Suitable for securely clamping workpieces Equipped with pipe clamp for additional application possibilities Compact size for versatile use Product features Brand: HBM Width: 50 mm Length: 45 mm Throat depth: 55 mm With this HBM vise with pipe clamp, you choose a functional tool that is easy to use in the workshop. A reliable solution for those looking for a compact vise with a practical pipe clamp.

Heuer - Brockhaus turntables

Technical data of the Heuer - Brockhaus Turntables HEUER turntable are made of forged steel, 360 gr. rotatable and lockable in any position The closed receiving plate prevents the ingress of chips and dirt and the slewing ring and receiving plate are finished for good guidance.

Heuer - Brockhaus vises

Jaw width 100 mm. |Maximum opening 125 mm. |Clamping depth 50 mm. |Jaw width 120 mm. |Maximum opening 150 mm. |Clamping depth 65 mm. |Jaw width 140 mm. |Maximum opening 200 mm. |Clamping depth 80 mm. |Jaw width 160 mm. |Maximum opening 225 mm. |Clamping depth 100 mm. |Jaw width 180 mm. |

HBM aluminum top jaws with felt

Magnetic pelvis covered with felt.

HBM Deluxe Anvil

HBM Deluxe Anvils are a robust and versatile choice for any workshop. Whether you are an experienced blacksmith or a do-it-yourselfer, a good anvil is indispensable for a wide range of metalworking tasks. This anvil is ideal for forging, hammering, bending and shaping metal and provides a solid base for precise and powerful work. Key benefits Suitable for forging, hammering, bending and shaping metal Indispensable tool for both professionals and do-it-yourselfers Robust design for various metalworking tasks Product features Product title: HBM Deluxe Anvils EAN code: 7435125797703 Application: versatile use in the workshop With HBM Deluxe Anvils, you choose a practical and reliable anvil that is suitable for daily use in the workshop. A solid base for anyone who works with metal.

HBM Profi Vice with Swivel Base, Maximum Clamping Width 100 mm.

The HBM Profi Bench Vise with swivel base is a practical and high-quality bench vise for every workshop. Thanks to its sturdy design, this tool is ideal for securing workpieces during precise and heavy-duty work. Both professionals and hobbyists benefit from the combination of ease of use and quality. Key benefits Swiveling and lockable base for flexible working at any desired angle Suitable for small yet heavy-duty work in the workshop Easy to mount thanks to its low weight Product features Maximum clamping width: 100 mm Brand: HBM Equipped with a convenient swiveling base with lever operation With the HBM Profi Bench Vise with swivel base, you get a versatile bench vise that provides stability and comfortable working. A reliable choice for anyone who wants to work efficiently and precisely in the workshop.

Heuer - Brockhaus vises with replaceable jaws

Jaw width 120 mm. |Maximum opening 150 mm. |Clamping depth 65 mm. |Jaw width 140 mm. |Maximum opening 200 mm. |Clamping depth 80 mm. |Jaw width 160 mm. |Maximum opening 225 mm. |Clamping depth 100 mm. |

Heuer - Brockhaus table clamps

Technical data of the Heuer - Brockhaus table clamps Simply attach your vice to the table with this handy clamp.

HBM Anvil on Base 500 g

The HBM Anvil on Base 500g is a practical and compact anvil for precise fine work. This anvil is suitable for watchmakers, jewelers, and other fine mechanical tasks where stability and control are important. Main benefits Suitable for watchmakers, jewelers, and fine mechanical tasks Compact size with a net weight of 500 g For precise and controlled work Product features Product: anvil on base Brand: HBM Net product weight: 500 g EAN code: 7435125754720

Heuer Brockhaus 120 mm compact bench vise, throat depth 65 mm.

Jaw width 120 mm. |Maximum opening 130 mm. |Clamping depth 65 mm. |

black steel pipe clamp / vises

Jaw width 100 mm. |Unloading mm. |Maximum opening 110 mm. |Dimensions of the anvil section mm. |Unloading 60 mm. |Base diameter mm. |Dimensions of the anvil section 55 x 70 mm. |HOH mounting size mm. |Base diameter 190 mm. |Dimensions mm. |HOH mounting size 163 mm. |Dimensions 380 x 110 x 230 mm. |Jaw width 125 mm. |Maximum opening 125 mm. |Unloading 65 mm. |Dimensions of the anvil section 65 x 80 mm. |Base diameter 200 mm. |HOH mounting size 172 mm. |Dimensions 430 x 140 x 245 mm. |Jaw width 150 mm. |Maximum opening 150 mm. |

Irwin bench vise 75 mm

(1)

The Irwin Table Vice 75 mm is a practical vice for securely clamping workpieces during various tasks. With a maximum clamping width of 75 mm, this model offers a reliable grip for precise and stable work. Thanks to its compact design and net weight of 1.82 kg, this table vice is a convenient choice for use on the workbench. Main advantages Firm grip thanks to a maximum clamping width of 75 mm Suitable for use on the workbench as a table vice Compact and relatively lightweight with a net weight of 1.82 kg Brand quality from Irwin Product features Brand: Irwin Type: Vices Max. clamping width: 75 mm With swivel base: No Net weight: 1.82 kg EAN code: 734442001690 This Irwin Table Vice 75 mm is a functional choice for those looking for a compact vice with a clamping width of 75 mm. A reliable addition to any workbench for safely clamping workpieces.

Skandia Bench Vise 100 mm

The Skandia vice 100 mm, also known as a parallel vice, is a practical and reliable aid for a wide range of tasks. Thanks to the secure clamping of a workpiece, you can work more accurately and comfortably when, among other things, sawing, drilling, filing, sanding, welding and grinding. This vice is made of high-quality cast iron and features a black finish for a professional appearance. Key benefits Suitable for firmly clamping workpieces during various operations Made of high-quality cast iron for a solid design Equipped with replaceable hardened steel jaws With small anvil for extra functionality Maximum clamping width of 100 mm Product features Brand: Skandia Type: vice / parallel vice Color: black lacquered Material: cast iron Jaws: replaceable, hardened steel Max. clamping width: 100 mm Maximum workpiece thickness: 135 mm With swivel base: no Net weight: 4.34 kg EAN: 8711562062178 The Skandia vice 100 mm is a handy addition to any workshop for those who want to clamp workpieces firmly and safely during precision work and general jobs.