Compressors Products

HBM euro plug-in nipple 1/4 "external

(1)

Wire External 1/4". |

HBM professional pressure regulator for compressor

When you use air pressure tools with too high a working pressure, your tools wear out faster and dangerous situations can arise. With the HBM pressure regulators with you can easily set and lock the working pressure. Because the supply of compressed air is constant, the connected tools can also perform optimally. The pressure regulators can be used with a compressor with a maximum air pressure of 10 bar. Controller reading is in MPa and Psi.

HBM 175 Bar High Pressure Air Reel Suitable for Water, Air and Grease

Length 15 Meter. |Maximum pressure 175 Bar. |Hose connection 3/8" |Material Staal met poedercoating. |

HBM 8 HP - 200 Liter Professional Low Noise Compressor SGS

This oilless compressor from the HBM brand has 4 motors and 8 cylinders, making it the low noise compressor with the largest air output in the range. Despite the large output, it is one of the quietest compressors available. With its 68 dB, this compressor is not much louder than an air conditioner. Short duty cycle and high yield Thanks to the combination of a large pressure tank and a high yield, this machine has a short duty cycle. This means that the machine will not start immediately when compressed air is used and that the pressure will be restored quickly (due to the high output). That makes this machine extra quiet. Automatic motor controller and LED display The special electronic motor controller monitors the load on the power grid. Each motor is started one by one and protected from overload. An overloaded motor is automatically switched off. The LED display on the controller shows the status of each motor and warns if something is wrong. A simple reset button on the controller returns the machine to operational status. Versatile This professional low noise compressor is intended for long-term continuous use. With its large output it is suitable for all compressed air related work and tools including blasting! Includes accessories and 5 year warranty The compressor is equipped as standard with two manometers, overpressure protection, pressure regulator, oil separator, a water drain tap under the pressure tank and a quick coupling. It comes with 4 rubber wheels, mounting hardware, air filter, and user manual. Because it is of excellent quality, this device has a warranty period of five years. Technical data of the HBM 8 HP - 200 Liter Professional Low Noise Compressor SGS Boiler capacity: 200 liters Maximum boiler pressure: 10 Bar Maximum working pressure: 8 Bar Motor power: 5,200 Watts Number of cylinders: 8 Voltage: 230 Volt/ 50Hz Current: 20 A Noise level: 70 dB Gross air output: 850 liters per minute Net air output: 600 liters per minute Installation dimensions: 140 x 45 x 90 cm Packaging dimensions: 152 x 52 x 92 cm Weight: 168 kg The HBM 8PK-200 Liter Professional Low Noise Compressor SGS is particularly suitable for professionals in various professional groups. Take advantage of it and order it today!

Scheppach Super Silent Compressor HC51Si

(2)

The Scheppach Super Silent Compressor HC51Si is the ideal choice for both professional and home users looking for a powerful and silent compressor. With a tank capacity of 50 liters, a power of 1500 Watt and a working pressure of 8 bar, this compressor is suitable for the most challenging tasks. Thanks to the low noise level of only 60 dB, you can work in peace, even close to your living space. Characteristics: Silent compressor with a 1500 W electric motor Tank capacity of 50 L with a suction capacity of 300 l/min Maximum working pressure of 8 bar Oil-free and low-maintenance compressor Anti-vibration rubber foot for safe storage and smooth operation 2 pressure gauges and 2 quick couplings enable quick tool changes Connection to a standard 230 V power supply Large wheels with a diameter of 175 mm and a handle for easy transport Specifications: Connection voltage: 230 V Motor power: 1.5 kW Frequency: 50 Hz Drive: Direct Maximum pressure: 8 bar Mobile: Yes Piston displacement per minute: 300 l Sound level: 60 dB(A) Tank capacity: 50 l With motor protection: Yes Depth: 730 cm Height: 620 cm Width: 300 cm Weight: 28 kg The Scheppach Super Silent Compressor HC51Si is a reliable and durable compressor suitable for a wide range of applications. Whether you work professionally or at home, this compressor offers you the power and comfort you need. Order today and benefit from our fast delivery and excellent service.

HBM universal overhead valve spring compressor

With the HBM Universal Overhead Valve Spring Compressor you can easily and quickly remove valve springs without disassembling the cylinder head. This universal design fits most cars and light trucks. The offset jaws are designed for easy grip and compression of the valve springs. The adjustment knob ensures quick and precise installation. Characteristics: Suitable for most cars and light trucks Offset jaws for easy grip Compresses valve springs quickly and efficiently Adjustment knob for precise installation With the HBM Universal Overhead Valve Spring Compressor you are assured of a handy and reliable tool for maintaining and repairing your vehicle.

HBM 6 PK - 150 Liter Professional Low Noise Compressor SGS

(1)

HBM 6 HP - 150 Liters Professional Low Noise Compressor SGS This oilless compressor is equipped with 3 motors and 6 cylinders, resulting in a significant air output for almost all compressed air applications. Despite the presence of 3 powerful motors, the noise level of this compressor is limited to only 70 dB, making it a quiet compressor. Thanks to the generous 150 liter pressure tank and the six cylinders, this low noise compressor will not start quickly (thanks to the 150 liter buffer), will quickly regain pressure (thanks to the 6 cylinders) and therefore has a short duty cycle. The electronic motor controller is designed to relieve the power grid by starting the motors one by one and keeps a close eye on whether a motor is overloaded. When that happens, the controller shuts down the affected motor until the reset button is pressed. This compressor has a long service life thanks to the constant electrical health monitoring performed by the motor controller, as well as the fact that this compressor operates without oil. This compressor is suitable for a wide range of compressed air-related work and tools, including light blasting work. The compressor is supplied as standard with two manometers, overpressure protection, pressure regulator, oil separator, a water drain tap under the pressure tank and a quick coupling. In addition, we offer a 5-year warranty from the date of purchase. Technical specifications: Boiler capacity: 150 liters Maximum boiler pressure: 10 Bar Maximum Working Pressure: 8 Bar Motor power: 3,900 Watts Electrical connection: 230 Volt/50 Hz Rated current: 16A Number of cylinders: 6 Voltage: 230 Volts Noise Level: Approx. 70 dB Gross air output: 600 liters per minute Net air output: 450 liters per minute Working temperature: +5 to + 35°C Compressor dimensions: 124 x 40 x 88 cm Packaging dimensions: 135 x 45 x 92 cm Weight: 128 KG The HBM 6 HP - 150 Liter Professional Low Noise Compressor SGS is supplied including: 4 rubber wheels Fastening material Air filter User manual Discover the power and reliability of the HBM 6 HP - 150 Liter Professional Low Noise Compressor SGS and benefit from quiet operation and a 5-year warranty for all your compressed air needs.

HBM 18 volt compressor on battery with accessories

Voltage 18 Volt. |Battery capacity 1300MAH LI-ION Batterij. |Maximum pressure 8 Bar. ( 120 PSI ) |Length of the air hose 30 cm. |

HBM gas tape 10 x 0.075 mm. x 10 meters.

Width 12 mm. |Thickness 0,075 mm. |Length 10 Meter. |

Scheppach Compressor HC51V 50L

(1)

The Scheppach HC51V compressor is a compact and powerful air compressor with an oil-free double cylinder and a 2.0 HP motor. The pressure reducer ensures optimum regulation of the working pressure. The tank has a capacity of 50 liters and a maximum air pressure of 10 bar. Scheppach has also paid a lot of attention to ease of use. For example, the compressor is easy to move due to the wheels and handle, and it has quick couplings for a quick tool change. Features of the Scheppach Compressor HC51V 50L: Suitable for air pressure tools such as air nailers, heat guns, pumps and more Content 50 litres Maximum pressure 10 bar Pressure reducer for optimum regulation of the working pressure Two quick couplings for quick tool changes Maintenance-free, oil-free pump Direct drive 2.0 HP motor Pressure gauge and quick coupling for regulated working pressure Technical specifications: Net weight (kg): 22.5 Dimension width: 345 mm Dimension height: 980 mm Dimension length: 355 mm Sound level: 97 dB(A) Capacity: 220 l/min Pressure: 10 bar Motor power: 230 Volt Tank capacity: 50 litres Power: 1500 W The Scheppach Compressor HC51V 50L is a powerful and user-friendly compressor with an oil-free double cylinder and a 2.0 HP motor. The pressure reducer ensures optimum regulation of the working pressure, while the tank has a capacity of 50 liters and a maximum air working pressure of 10 bar. The compressor is equipped with wheels and handle for easy transport, and two quick couplings for a quick tool change. The technical specifications are net weight (kg) 22.5, width dimension 345 mm, height dimension 980 mm, length dimension 355 mm, noise level 97 dB(A), capacity 220 l/min, pressure 10 bar, engine power 230 Volt, tank capacity 50 liters and power 1500 W. The Scheppach Compressor HC51V 50L is the perfect choice for the use of air pressure tools.

HBM 4-fold distribution block

Meet the HBM 4 Fold Distribution Block, the perfect solution for distributing air to multiple tools at the same time. Below you will find all technical details and specifications: Brand: HBM Type: Clutch Price in Euro: N/A Connection: 1/4 Special features: The plug nipple shown is not included. This manifold allows you to distribute air to four different tools without hassle. The block is easy to connect to your air hose and has four 1/4 inch connections. Please note that the plug nipple shown is not included. This product is from the renowned brand HBM and guarantees high quality. The price of this 4-way distribution block is not applicable because it depends on the dealer and any offers. In any case, this distribution block is essential for anyone who wants to work with several tools at the same time. Order today and enjoy the useful functionality of this product!

HBM 120 Liter Professional Low Noise Compressor - Model 2

The HBM 120 Liter Professional Low Noise Compressor - Model 2 is a top quality compressor with low noise production, intended for long-term use when powering heavy compressed air tools such as those used in a car garage. This oil-less compressor is also very suitable for cleaning work. The compressor is supplied as standard with two pressure gauges, overpressure protection, pressure regulator, oil separator, a water tap under the pressure tank and a quick coupling. And with a whopping 5 year warranty! The 120 liter pressure tank provides a large compressed air buffer, so that the compressor will not start quickly. This ensures a short duty cycle of the machine. The motor controller starts the motors one by one in order to avoid overloading the power grid. An overloaded motor is also automatically switched off by the controller, until someone presses the reset button again. Below you will find the technical characteristics of the HBM 120 Liter Professional Low Noise Compressor - Model 2: Boiler capacity: 120 litres Maximum boiler pressure: 10 bar Working pressure: 6-8 bar Motor power: 3000 watts Gross air output: 400 liters per minute Net air output: 320 liters per minute Number of cylinders: 8 Noise level: 53-60 DB(a) Working temperature: +5° to 35°C Voltage: 230V / 50Hz Dimensions (L x H x W): 117 x 69 x 39cm Weight: 87 KG With the HBM 120 Liter Professional Low Noise Compressor - Model 2 you have a top quality compressor with a long lifespan and a 5-year warranty. Thanks to the 120 liter pressure tank you have a large compressed air buffer and a short duty cycle of the machine. The motor controller starts the motors one by one in order to avoid overloading the power grid. Order today and take advantage of this excellent compressor!

HBM piston ring compressor set

With this piston ring compressor set you can install piston rings ranging from 73 mm to 111 mm. The easy-to-use ratchet mechanism allows the user to compress the piston rings in small steps. The set contains 1 rattling piston ring pliers (self-adjusting) and 6 ring compressors, they are all supplied in a handy case. The 6 compressor sizes are: 73-79, 79-86, 86-92, 92-98, 98-105 and 105-111 mm. The set is made of durable material, which is ideal for daily use by both do-it-yourselfers and professional workshops.

Michelin 10 meter air hose with couplings

Inner diameter 8 mm. |Outer diameter 13 mm. |Maximum pressure 20 Bar. |Connection 1 x EURO Snelkoppeling, 1x EURO nippel. |

HBM orion insert nipple 1/4 "internal

(2)

Thread Internally 1/4". |

HBM as 48 a airbrush compressor

(1)

Noise level Ca. 50 DB(A). |Boiler capacity 3 Liter. |Workload 0.2 - 6 Bar. |Engine power 185 Watt / 0.4 PK. |Amount of cilinders 4. |Voltage 220 - 240 Volt. |Connection 1/8 BSP. |Net Air Yield 78 Liter / Minuut. |

HBM euro quick coupling model 1

The HBM Euro Quick Coupling Model 1 is a handy quick coupling suitable for EURO connections. With a 1/4" internal thread, this quick coupling is perfect for various types of tools and accessories. Technical data: Suitable for EURO connection Thread Internal: 1/4" With the HBM Euro Quick Coupling Model 1 you can quickly and easily connect to your tools, allowing you to work efficiently and save time. Order today and experience the convenience of this handy shortcut!

HBM 30 meter air reel with rotatable base

Length of the hose 30 Meter. |Hose material PU ( polyurethaan luchslang ) |Diameter of the hose 12 mm. |Inner diameter of the hose 8 mm. |Maximum pressure 17 Bar. |

HBM as 18 a airbrush compressor

Noise level Ca. 50 DB(A). |Boiler capacity N.V.T. |Workload 0.2 - 4 Bar. |Engine power 150 Watt / 1/6 PK. |Amount of cilinders 1. |Voltage 220 - 240 Volt. |Connection 1/8 BSP. |Net Air Yield 23 Liter / Minuut. |

Stanley compressor Silent 6 liter DST100/8/6

(1)

This is an excellent choice for anyone looking for a quiet and powerful compressor. With a capacity of 6 liters, this compressor is perfect for inflating tires, painting and other jobs in and around the house. With the Stanley compressor Silent 6 liter DST100/8/6 you can complete jobs quickly and efficiently without having to worry about noise. Specifications: Dimensions (LxWxH): 34 x 35 x 32 cm Weight: 17 kg Power supply type: Mains power Voltage: 230 V Number of cylinders: 1 Cord length: 1.50 cm Power: 1 HP Suction capacity: 105 l/m Speed: 1450 rpm Decibel: 59 dB Working pressure: 8 bar Power: 1100 W The Stanley compressor Silent 6 liter DST100/8/6 is a reliable and durable compressor that meets all your personal and professional needs. With its quiet operation and compact size, this compressor is easy to transport and store. Buy your own Stanley compressor Silent 6 liter DST100/8/6 today and experience the benefits of a high-quality and quiet compressor.

HBM as 189 a airbrush compressor

Noise level Ca. 50 DB(A). |Boiler capacity 3 Liter. |Workload 0.2 - 6 Bar. |Engine power 150 Watt / 1/6 PK. |Amount of cilinders 1. |Voltage 220 - 240 Volt. |Connection 1/8 BSP. |Net Air Yield 23 Liter / Minuut. |

HBM dehumidifier, pressure regulator and oil nebulizer model 2

Terminals 1/4" |Maximum pressure 10 Bar |Dimensions 16 x 9 x 6 cm. |

HBM low noise compressor 90 liters

This is the perfect compressor for your workshop! The HBM low noise compressor with a capacity of 90 liters is powerful and quiet, ideal for all kinds of jobs. With a capacity of 2250 W and 6 cylinders, this compressor delivers a gross air output of 392 L/m and a net air output of 325 L/m. The starting pressure of 6 bar and stopping pressure of 8 bar ensure that you always have the right pressure for your work. Power: 2250 W Voltage: 230 V Speed (no load): 1400 RPM Tank capacity: 90 L Gross air output: 392 L/m Net air output: 325 L/m Maximum boiler pressure: 10 bar IP value: IPX0 Noise level: 85 dB(A) Dimensions (LxWxH): 100 x 63 x 66.5 cm Weight: 65 kg With a noise level of 85 dB(A) and a minimum working temperature of 5 °C, this compressor is also very user-friendly. The compressor is of top quality and will help you to carry out every job quickly and efficiently. Order it today and experience the convenience of the HBM low noise compressor yourself!

Fiac TDRY 9 air dryer for compressor for 850 liters per minute NW

Make sure that your work does not come to a standstill in winter due to frozen cylinders, valves and the air system. Invest in reliability, higher quality and a longer life of your air tools and air driven system with the FIAC TDRY air dryer. Most important features Refrigeration dryer coupled to the compressor ensures higher air quality Reduces humidity from 85% to 20% or lower Condensation in the air system causes rust, malfunctions and a shorter service life Condensation in cold periods can freeze, causing the air system to be temporarily out of order The FIAC TDRY air dryer prevents this and ensures high operational reliability Specifications Voltage: 230 V Frequency: 50 Hz Power: 164 W Maximum capacity: 600 L/min Maximum working pressure: 16 bar Connection: 3/4" Temperature range: from +5 to +45 °C Dimensions (L x W x D): 35 x 49.3 x 45 cm Weight: 19 Kg Purchasing the FIAC TDRY air dryer is a smart investment to improve the operational reliability and lifespan of your air tools and air-driven system. At a humidity of 85%, the dryer can reduce this to only 20% or lower, preventing condensation and thus rust, malfunctions and a shorter lifespan. Invest in reliability and quality with the FIAC TDRY air dryer.

Scheppach Compressor HC06 with accessory set

The Scheppach HC06 is the perfect solution for all your compressed air tasks. With its powerful and oil-free compressor, this device is completely mobile and can handle even the most demanding tasks. Thanks to the many accessories that come with this compressor, you can easily get any job done. Lightweight and ergonomic The Scheppach HC06 weighs only 9.7 kg and can be easily transported thanks to the ergonomic handle. This means you can take the compressor with you anywhere and the device is very mobile. Low maintenance and long life Thanks to the oil-free technology, this compressor is low-maintenance and has a long service life. This makes the Scheppach HC06 a sustainable investment for all your compressed air tasks. Powerful and efficient With a power of 1200 Watt and a boiler volume of 6L, the Scheppach HC06 can handle even the most demanding jobs. With a maximum working pressure of 8 bar and an air flow of 200 L/min, this compressor is powerful and efficient. Extensive accessory set The Scheppach HC06 comes with an extensive accessory set, so that you can immediately get started with all compressed air tasks. You can think of a blow gun, a spiral hose and various adapters. Reliable and stable Thanks to the three rubber feet, the Scheppach HC06 is stable on any surface. This allows you to get started with all your compressed air tasks with peace of mind. In short, are you looking for a powerful and mobile compressor with a long lifespan and an extensive accessory set? Then the Scheppach HC06 is the perfect solution for all your compressed air tasks!

Michelin air force compressor set

Noise level 96 dB(A). |Net weight 5,5 Kg. |Dimensions width 46 x 14.6 x 46 cm. |Capacity 160 l/min |Pressure 8 bar. |Engine power 1100 Watt. ( 1,5PK ) |Voltage 230 Volt. |

HBM 20 meter air reel

(1)

Length of the hose 20 Meter. |Diameter of the hose 10 mm. |Inner diameter of the hose 6,5 mm. |Maximum pressure 17 Bar. |

Michelin MX 6-1 low noise compressor 6 liters

(1)

Michelin MX 6-1 silent compressor 6 liters | Specifications and features Michelin MX 6-1 silent compressor 6 liters Product name: Michelin MX 6-1 low noise compressor 6 liters Tank capacity: 6 litres Maximum boiler pressure: 8 bar Gross air output: 130 L/min Net air output: 90 L/min Wattage: 750 W / 1 HP Number of cylinders: 2 Voltage: 230 volts Noise level: 78 DB Dimensions (WxDxH): 37 x 33 x 31 cm Installation dimensions: 40 x 35 x 35 cm Weight: 15.5 Kg Packaging dimensions: 35 x 42 x 35 cm The Michelin MX 6-1 silent compressor is a high-quality compressor with a tank capacity of 6 liters and a maximum boiler pressure of 8 bar. This compressor is equipped with a strong 750W / 1 hp motor and has 2 cylinders for optimal performance. The gross air output of this compressor is 130 L/min, while the net air output is 90 L/min. Thanks to its quiet operation with a noise level of 78 dB, this compressor is ideal for use in the home, garage or workshop. The compact dimensions of 37 x 33 x 31 cm make it easy to place the compressor in any desired location, and the mounting dimensions of 40 x 35 x 35 cm provide extra stability. With a weight of 15.5 kg, this compressor is also easy to transport. The packaging dimensions of 35 x 42 x 35 cm ensure that the compressor can be stored or transported safely and protected. The Michelin MX 6-1 silent compressor 6 liter combines excellent performance and reliability, making it the ideal choice for both professional and DIY use.

HBM low noise compressor 8 liters

The HBM low noise compressor of 8 liters is the ideal choice for DIYers who are looking for a quiet and efficient compressor. With a noise level of only 78 decibels and a gross air output of 108 liters per minute, you can get started with this compressor without worries. Material: Aluminum Dimensions: 50 x 19 x 52.5 cm Weight: 16 kg Power cord length: 200 cm Number of cylinders: 2 Speed (no load): 1400 RPM IP value: IPX0 Maximum boiler pressure: 8 bar Net air output: 92 L p/m Tank capacity: 8 L Minimum working temperature: 5 Celsius Maximum working temperature: 38 Celsius Voltage: 230 V Power: 550 W With its compact size and lightweight design, this compressor is easy to move and store. Whether you are doing small jobs in the garage or professional use, the HBM low noise compressor is always ready for you. Order it today and enjoy professional performance with minimal noise!

Michelin 2 HP Professional 50 Liter Compressor 10 Bar - 240 Liter Per Minute

This light Michelin compressor with a larger tank is ideal for use in the smaller workshop. With a 50 liter expansion tank, this compressor offers a larger buffer than its 24 liter variant, making the rest-compression cycle longer. The compressor is easy to move thanks to the two wheels with rubber tread and the handy handle. This very complete small compressor delivers great performance and is suitable for tasks such as tacking, light spraying, airbrushing and various cleaning work. The compressor delivers a nice continuous air flow and levels out pressure fluctuations thanks to the 50 liter expansion tank. The direct drive with a 1500 Watt motor ensures maintenance-free operation, although occasional oil level checks may be necessary. The compressor has a high noise level of 95 dB. The compressor is supplied with a pressure reducing valve, safety valve, thermal protection, water drain valve and two pressure gauges for accurate pressure control. Technical data: Boiler capacity: 50 liters Maximum boiler pressure: 10 Bar Maximum Working Pressure: 8 Bar Motor power: 1500 Watt / 2 HP Number of cylinders: 1 Voltage: 230 Volts Noise Level: Approx. 95 DB(A) Gross Air Output: 150 Liters / Minute Net Air Output: 105 Liters / Minute Packaging dimensions: 75 x 33 x 64 cm Weight: 36 kg Included as standard: Safety valve Reducing valve with pressure gauge and coupling Drain tap on the tank Other Specifications: Top quality Italian compressor, oil filled, mobile.