Masonry tool Products

KWB Trowel Stainless Steel 28X13 Vert, 8mm

Stainless steel, stainless, lacquered wooden handle, for applying and smoothing plaster or filler on walls and ceilings, filling cracks, joints and holes, evenly applying tile adhesive Specifications: Item number: KWB924448 Barcode: 4009319244484 Brand: KWB Net weight (kg): 0.326

Skandia masonry wire tension set 17m

This Skandia masonry cord tensioning set, also known as masonry wire, masonry corners or clamping block set, is used for masonry walls. After properly setting out and setting the masonry profiles vertically, and measuring exactly horizontally and transferring the masonry layers (one mortar layer + one stone or cellular concrete block layer) to the masonry profiles with a pencil, the masonry cord is tensioned to the masonry profiles at the correct height by means of these clamping blocks. After this, the top of a row of bricks is laid along the masonry cord. After this, the tension blocks with masonry cord can be pushed up one layer (so mortar layer + stone layer) to the next height. Specifications: Item number: SKA1046656 Barcode: 8711562574114 Brand: SKANDIA Net weight (kg): 0

Skandia Sealant applicator 2x2mm

The Skandia glue spreader, also called a sealant spreader, with oblique teeth 2 x 2 mm is a spatula with saw-shaped or trapezoidal teeth, with which glue or sealant can be applied evenly on a surface, such as: walls and floors. The size of the trowel and the amount of glue (sealant) usually depend on the material to be glued. 1.5 mm to 2 mm helical teeth are used for cork, textile, linoleum and floor covering. The following dimensions generally apply to gluing tiles with a glue spreader fitted with a square toothing, namely: Tile size 0-15 cm: a tooth depth glue spreader of 4-6 mm. Tile size 16-25 cm: a tooth depth of 8 mm. Tile size 30 cm or more: a tooth depth of 10-12 mm. Specifications: Item number: SKA1046472 Barcode: 8711562087812 Brand: SKANDIA Net weight (kg): 0

Skandia Spack knife stainless steel 600mm soft grip

The Skandia stainless steel spatula, also known as plaster knife, ceiling smoother, facade spatula or plaster pack knife, has a width of 600 mm. This handy tool is used by plasterers to finish the plaster layer. After setting up the plaster layer, let it set slightly and use the spacing knife to make the plaster layer tighter. Repeat this operation again after some setting for the best result. Elastic and stainless steel The elastic stainless steel blade is curved and mounted in a light metal holder/profile. The handle is made of black-orange plastic with a 2-component soft grip. This provides more comfort and precision when using the spacing knife. The Skandia spacing knife is not only suitable for finishing plaster, but also for various other purposes. Specifications Item number: SKA1046205 Bar code: 8711562353436 Brand: Skandia Net weight (kg): 0

Skandia Spack knife stainless steel 250mm soft grip

Skandia stainless steel spatula, also called plaster knife, ceiling smoother, facade spatula or plaster pack knife. Used by the plasterer after applying the plaster layer. Allow the plaster layer to stiffen slightly, then go over the plaster with the spacing knife to make it tighter. Repeat this operation again after some stiffening. Elastic stainless steel flexible blade Alloy holder/profile Black-orange plastic 2-component soft grip handle for more comfort and precision. Also suitable for various other purposes. Technical specifications: Item number: SKA1046202 Bar code: 8711562353405 Brand: SKANDIA Net weight (kg): 0 The Skandia Spack knife stainless steel 250mm soft grip is an important tool for plasterers and other professionals who work with plaster and coatings. The knife is made of elastic stainless steel and has a flexible blade. This makes the knife perfect for neatly finishing plaster layers. The light metal holder/profile provides extra sturdiness and durability of the knife. In addition, the knife has a black-orange plastic 2-component soft grip handle, which makes the knife comfortable to hold and provides more comfort and precision. The Skandia Spack knife stainless steel 250mm soft grip is not only ideal for plasterers, but also suitable for various other purposes. The knife has a length of 25 cm and weighs only 0 kg, making it easy to use. If you are looking for a reliable and high-quality knife for finishing plaster or applying coatings, the Skandia Spack knife stainless steel 250mm soft grip is definitely a good choice. Order it now and get started with your projects!

KWB Sludge Trowels, Steel 130X280mm

Steel, hardened, smooth, lacquered wooden handle, for the flat application and smoothing of plaster, filler, grouting mortar and glue Specifications: Item number: KWB923728 Barcode: 4009319237288 Brand: KWB Net weight (kg): 0.338

KWB Joint Nail, Steel 8 mm

(1)

Steel, hardened, long, lacquered wooden handle, for grouting masonry Specifications: Item number: KWB925016 Barcode: 4009319250164 Brand: KWB Net weight (kg): 0.064

Skandia Masonry cord 2x50mtr orange polyp

This Skandia masonry cord is used as lead line for masonry. This allows masons to check whether the masonry is straight. This cord can also be used for multiple purposes. The orange color makes this rope extra noticeable. Thickness masonry cord 1.3 mm. Specifications: Item number: SKA1046665 Barcode: 8711562574121 Brand: SKANDIA Net weight (kg): 0

HBM Tile Trowel Stainless Steel

This is the perfect tile trowel for all your tiling projects! The HBM Tile Trowel Stainless Steel is made of high-quality stainless steel 420 and has a blade of 152 mm long and 1.0 mm thick. With a weight of only 215 g, this trowel is easy to handle. The blue and black colours give it a stylish look. Specifications: Blade: 152 mm Thickness: 1.0 mm Weight: 215 g Color: Blue + Black Material: Stainless steel 420

HBM Joint Scraper

With the HBM Joint Scraper, removing mortar, soil or other dirt between joints becomes a piece of cake. Thanks to the two wheels on the scraper, you can easily drive over the joint, while the aluminium material ensures a sturdy and light construction. The use of a nail in the joint scraper makes cleaning joints even easier. Two nails are already included with the joint scraper, but it is also compatible with all types of hardened masonry nails. Easy to use thanks to the two wheels Made of strong and lightweight aluminum Includes 2 nails, compatible with hardened masonry nails

WOLF-Garten Joint Brush FB-M, 90mm

(1)

The WOLF-Garten Joint Brush FB-M, 90mm is a handy tool with which you can clean your garden paths and driveways beautifully again. This joint brush is from the WOLFGARTEN brand, a well-known name in the gardening world, and is made of high-quality materials. Weighing only 0.26 kg, the brush is easy to handle and perfect for cleaning narrow joints between tiles and sidewalk tiles. Specifications: - Barcode: 4008423878240 - Brand: WOLFGARTEN - Net weight (kg): 0.26 Make your garden paths and driveways look like new again with the WOLF-Garten Joint Brush FB-M, 90mm. The brush is very effective in removing dirt and moss from joints and offers an excellent balance between stiffness and flexibility. Thanks to the 90mm width of the brush you can work quickly and efficiently. The ergonomic, non-slip handle provides a good grip and great comfort during use. The WOLF-Garten Joint Brush FB-M, 90mm is a perfect addition to your garden tools and is suitable for use in any season. With this joint brush you can make your garden paths and driveways look like new again and give your garden a well-groomed appearance. Order this handy brush today and get started! Characteristics: - Width: 90mm - Weight: 0.26kg - Brand: WOLFGARTEN - Color: green/black - Material: high quality plastics with steel bristles Advantages: - Effective cleaning of the joints between flagstones and sidewalk tiles - Excellent balance between stiffness and flexibility - Ergonomic, non-slip handle for good grip and great comfort - Suitable for use in any season - Makes your garden paths and driveways look like new again - Perfect addition to your garden tools Order the WOLF-Garten Joint Brush FB-M, 90mm today and make your garden paths and driveways beautifully clean again!

Skandia Richtlat trapezium 100cm

The aluminum Skandia plastering row, also called a straight edge, always has a 100% straight profile due to its trapezoid shape, which allows you to determine whether a surface is exactly flat. This makes it an ideal tool for plasterers to smooth walls and floors. The straight edge can also be used to level a sand bed. Characteristics: 100 cm long Trapezium shape for 100% straight profile For smoothing walls and floors Suitable for spreading sand beds Barcode: 8711562353504 Brand: Skandia Net weight (kg): 0 With this Skandia Straightening Lath Trapezium 100cm you ensure that your plasterwork and sand beds to be spread are always perfectly straight. Order it now and make your job even easier and more efficient!

Skandia Masonry Trowel 180mm Left

The Skandia Masonry Trowel is an essential tool used when handling cement, plaster or mortar during the construction process. This specific model is designed for left-handed use and measures 180mm. Below you will find more information about the benefits and specifications of this product. Design and Applications The Skandia Masonry Trowel has a round and a straight side. In the left-handed model, the rounded side is on the left side, allowing the tool to be used comfortably and efficiently by left-handed people. The straight side can be used for easy scooping and scraping of the mortar bucket and then spreading the mortar. In addition, it is possible to use the trowel to check whether the butt joints are directly above each other. Cutting fired stone to size can be done using the curved side of the trowel. This makes it possible to accurately cut the stone to size for a perfect finish. Specifications Barcode: 8712817258247 Brand: Skandia Net weight (kg): 0 Dimensions: 180mm Order the Skandia masonry trowel 180mm Left now and benefit from a comfortable and efficient construction process for left-handed people.

Scheppach Concrete Mixer MIX125

Scheppach Concrete Mixer MIX125 - Powerful mixer for professional jobs The Scheppach concrete mixer MIX125 is the ideal powerful mixer for professional jobs where you have to mix a lot of concrete. The mixer is equipped with a double insulated induction motor of no less than 550 watts, making it not only powerful, but also safe to use. The MIX125 is drum driven via a cast gear, which ensures a reliable and smooth power delivery. Thanks to the robust drum with a capacity of 125 liters, you can mix more than enough concrete for all your jobs with this concrete mixer. Rubber wheels for extra stability Moving the Scheppach MIX125 is easy thanks to the rubber wheels. These also provide extra stability when the concrete mixer is in place. This way you prevent accidents and you can work safely. Easy to empty thanks to large control wheel The Scheppach concrete mixer MIX125 is designed in such a way that it is easy to empty. This is due to the large control wheel, with which you can easily tilt the drum. This way you can easily pour the concrete into a wheelbarrow or any other desired location. Specifications Scheppach concrete mixer MIX125: Double insulated 550 Watt induction motor Drum driven by means of a cast gear Content of 125 liters Equipped with rubber wheels for extra stability Easy to empty thanks to large control wheel With the Scheppach concrete mixer MIX125 you get a powerful and reliable mixer that will not only save you time, but also a lot of effort during DIY. Order the Scheppach concrete mixer MIX125 today and start professionally mixing concrete for all your jobs.

Scheppach Concrete Mixer MIX65

The Scheppach MIX65 is the perfect choice for those looking for a powerful yet compact concrete mixer for their home and garden projects. With its 63 liter mixing drum, it has enough capacity to carry out small construction work. The concrete mixer is designed to be compact for easy storage between uses. In addition, the low pivot point of the drum makes working very easy. Important features of the Scheppach MIX65 220 watt electric motor provides a speed of 27.5 revolutions per minute 63 liter mixing drum has a capacity of up to 55 kg Drum opening of 260 mm ensures effective emptying of the mixer Drum rotation height of 620 mm enables comfortable working Stability and easy transport thanks to the transport attachment and wide wheelbase Easy to maintain, durable and robust The Scheppach MIX65 can be used for mixing concrete mortar, plaster or screed of individual building materials. The 220-watt electric motor ensures that the mixer is powerful enough to mix these materials properly. In addition, the mixer has a timer that allows you to accurately control the mixing process. The well-designed Scheppach MIX65 also has a transport attachment and a wide wheelbase, making it easy to transport and stable to use. It is also very durable and robust, making it an ideal choice for both professional and DIY construction projects. In short, if you are looking for a concrete mixer that is compact, reliable and powerful enough for your home and garden construction projects, the Scheppach MIX65 is the perfect choice. Order it today and start mixing your building materials with ease and precision.

Makita Glue and sealant gun body, 18 Volt, DCG180XZK

With the Makita Glue and sealant gun body, 18 Volt, DCG180XZK you can glue or seal materials together effortlessly and accurately. Thanks to the 18 Volt battery and 5000 N pressure force you are assured of powerful performance. Battery protection: yes Dimensions (lxwxh): 404x108x281 mm Built-in lighting: yes Machine voltage: 18 V Softgrip: yes T type motor: 2-pole Variable speed control (rotary knob): yes Variable speed control (switch): yes With the Makita DCG180XZK you always have optimal control over the application of the glue or sealant, thanks to the variable speed control and soft grip. In addition, the built-in lighting ensures that you have good visibility even in dark work areas. An indispensable tool for both professional handymen and do-it-yourselfers!

HBM Tile Washing Set 3-piece

Make tiling your space a lot easier with the HBM Tile Washing Set 3-piece! This set contains a 280 x 140 mm plasterboard made of PS foam and sponge, with a handle in white and yellow sponge, which ensures a comfortable grip while working. With a weight of only 210 g, this is a handy and lightweight tool to work with. Bucket size: 420 x 235 x 175 mm Bucket Color: Blue Roller size: 280 x 183 x 80 mm With the HBM Tile Washing Set 3-piece you can get started tiling your space accurately and efficiently. It is an indispensable set for every do-it-yourselfer or professional looking for quality tools. Order today and make tiling your walls and floors a breeze!

HBM Spackling Knife Set 5-piece

The HBM Spackle Knife Set is a perfect addition to your tool collection. This set contains 5 spackle knives with a blade length of 150, 200, 250, 300 and 350 mm, so you have the right tool for every job. Made from high quality stainless steel 420, these knives are durable and high quality. The blades have a thickness of 0.5 mm, making them easy to handle and giving a professional result. Weighing only 1050g, these knives are light and comfortable to use. The blue and black colours give them a striking look and make them easy to distinguish from other tools. Whether you are a professional or just like to do DIY around the house, the HBM Spackknessenset is a must-have for every DIY enthusiast. Order today and experience the ease and quality of this set yourself! Blade lengths: 150, 200, 250, 300, 350 mm Thickness: 0.5 mm Weight: 1050 g Color: Blue + Black Material: Stainless steel 420

HBM 2 Piece Caulking Iron and Removal Tool Set

With the HBM 2 Piece Sealant Spreader and Removal Tool Set you have the perfect tools for removing and replacing sealant. This set contains a polypropylene sealant spreader and removal tool, which ensure a professional finish. Made of polypropylene Provides a smooth, neat finish on most sealants and caulking materials Suitable for use on silicone, latex and ac This set allows you to easily remove old caulk and apply new caulk, making your job quick and easy. Add the HBM 2-Piece Caulking Iron and Removal Tool Set to your toolbox and enjoy professional results when finishing caulk!

HBM 4 Piece Silicone Joint Smoother, Caulking Smoother Set

With the HBM 4-Piece Silicone Joint Smoother Sealant Smoother Set, you have all the tools you need to perfectly finish silicone joints. The set consists of different shapes of spreaders, which gives you flexibility in spreading silicone on various surfaces. The compact size of the components makes them easy to store and take with you to any job site. The spreaders with a cut corner and rounded edge allow you to apply silicone to hard-to-reach places, making the set ideal for detailed work. As a professional installer, this set should not be missing from your toolbox. Make your work easier and more professional with the HBM 4-Piece Silicone Joint Smoother Sealant Smoother Set! Complete set for perfect finishing of silicone joints Compact size for easy storage and portability Various shapes for flexibility in use Suitable for detailed work and hard-to-reach places.