Chisels, chisel sets and inserts Products

Tormek se - 77 chisel sharpening attachment

Give your tools a sharp edge with the Tormek SE - 77 Chisel Sharpening Attachment from Tormek. This handy attachment is specially designed to effortlessly sharpen your chisels to the desired sharpening angle. Below you can see the technical specifications: Clamping surface with two clamping screws to secure the tool Guided by the Universal Guide Micro adjuster at the bottom of the Universal guide for adjusting the sharpening angle Two safety stops on the Universal Guide to keep the sharpening attachment in place Conventional attachments require manual adjustment, but this attachment adjusts the tool for the correct angle Lower fixing screw to secure shorter tools Designed for sharpening towards the sharpening angle Get the most out of your chisels with the Tormek SE - 77 Chisel Sharpening Attachment!

HBM 16-piece pen ejector and cold chisel set

Sizes Center Points 3 x 125 mm, 5 x 150 mm. |

HBM widia inside threading tool

Technical data of the HBM Widia Within Thread Cutting Chisels. Cutting angle 60 degrees. Equipped with welded fixed Widia Tip.

HBM pointed chisels with hm insert

Technical data of the HBM Puntbeitel with HM insert. The chisel is supplied complete with torx key and 1 insert.

HBM 9-piece internal and external thread cutting chisel set with hm inserts

Technical data of the HBM 9-Piece Internal and External thread cutter set with HM inserts. Sets of 10 x 10, 12 x 12 and 14 x 14 mm consist of. 1 x HBM Right Hand Thread Cutting Tool Holder (ISO) GR-11 1 x HBM Right Hand Thread Cutting Tool Holder Round with 2 flat sides (ISO) GR-11 2 x HBM External thread cutting tool plate ERA60 - 11 mm. With a pitch range of 0.5 to 1.5 mm. 2 x HBM Female thread cutting tool plate IRA60 - 11 mm. With a pitch range of 0.5 to 1.5 mm. 1 x T8 Torx Key. 1 x Extra Torx Screw. 1 x Plastic storage case. Sets of 16 x 16 and 20 x 20 mm consist of. 1 x HBM Right Hand Thread Cutting Tool Holder (ISO) GR-16 1 x HBM Right Hand Thread Cutting Tool Holder Round with 2 flat sides (ISO) GR-16 2 x HBM External thread cutting tool plate ERA60 - 16 mm. With a pitch range of 0.5 to 3 mm. 2 x HBM Female thread cutting tool plate IRA60 - 16 mm. With a pitch range of 0.5 to 3 mm. 1 x T15 Torx Key. 1 x Extra Trox Screw. 1 x Plastic storage case.

HBM 50 mm. mc4 boring head with 5 HBM chisels and flycutter

Recording MC 4. |Diameter of the head 50 mm. |Graduation 0,01 mm. |Chisel recording 12 mm. |

HBM cold chisels with protection

Hardened steel 60 mm. chisel with octagonal shank, hardened steel blade and shock-absorbing hand protection. Rust resistant, durable painted finish. For forming and breaking tiles, concrete and other stone materials.

HBM 3-piece internal turning tool set with hm inserts

The HBM 3 Piece Internal Turning Tool Set with HM Inserts is a perfect set for turning internal surfaces. The set consists of the following chisels: 1 x 8 x 100mm Internal turning tool with CCMT 06 insert. 1 x 10 x 125mm Internal turning tool with CCMT 06 insert. 1 x 12 x 150mm Internal turning tool with CCMT 06 insert. This set comes standard with: 3 x CCMT 06 insert mounted on tool. 1 x Matching Torx Key. 1 x Wooden storage box. With the HBM 3-piece internal turning tool set you can easily turn internal surfaces and thus create a perfect finish. Order now and take advantage of our fast delivery and competitive prices!

HBM round inserts coated

All our products have a warranty of at least 1 year.

harlingen professional 4-piece internal turning tool set with hm inserts

Discover the Harlingen Professional 4-piece interior turning tool set with HM inserts. Harlingen is a professional brand for the industry, which applies very strict quality control. In the new modern workshop, every production procedure is carried out in-house, using their own steel furnace, computer-controlled heat treatment device, special hardening equipment, traditional forging procedure and the latest CNC Machines. As an ISO9001:2008 certified enterprise, full test of our own made raw material of each batch is done. With this set you have the following technical data: 1 x 8 x 100mm Internal turning tool with CCMT 06 insert. 1 x 10 x 125mm Internal turning tool with CCMT 06 insert. 1 x 12 x 150mm Internal turning tool with CCMT 06 insert. 1 x 16 x 200mm Internal turning tool with CCMT 09 insert. This set comes standard with: 3 x CCMT 06 insert mounted on the bits. 1 x CCMT 09 insert mounted on the bit. 2 x Matching Torx key for changing the inserts. 1 x Sturdy Aluminum storage box with FOAM inlay. With the Harlingen Professional 4 Piece Internal Turning Tool Set with HM Inserts you are assured of a top quality product, which is produced to the highest standard. Try it today and experience the difference!

HBM ccmt inserts non ferrous

Technical data of the CCMT inserts. CCMT 06 suitable for 6 to 12 mm chisels CCMT 09 suitable for 14 to 16 mm Chisels

HBM parting knife including 2 inserts

Technical data of the HBM Parting Knife including 2 Inserts These parting knives are suitable for 3 mm parting knives. The knives can be used in designated parting holders.

Bahco 424P-S6-EUR 6 Piece Chisel Set

The Bahco 424P-S6-EUR is a complete chisel set consisting of 6 different wood chisels. These chisels meet the highest demands in terms of cutting power and performance. They are precision ground for maximum sharpness and come in a handy storage box. Advantages of the Bahco 424P-S6-EUR Specially designed 2-component handle for maximum control and ease of use. Hardened and tempered for long life. Precision ground for maximum sharpness. Supplied in a handy storage box. What's in the package? - Bahco Wood chisels: 6 - 10 - 12 - 18 - 25 - 32mm. Specifications Material: Steel. Handle material: Plastic. Chisel type: Wood chisel. Chisel Shape: Straight. The Bahco 424P-S6-EUR is the ideal set for anyone looking for high quality chisels for precision and control. The 2-component handle gives you maximum grip and ease of use, and the hardened and tempered chisels last for a long time. With this complete set you have all the sizes of chisels you need for working wood.

Tormek tts - 100 setting jig turning tools

Technical data of the Tormek TTS - 100 Setting Jig Turning Tools: Patented wood turning degree divider. Perfects working with woodturning tools. Precise angle determination of gouges and straight and oval wood turning tools with straight or curved angle. Then perfect sharpening. Suitable for use with the gouging attachment SVD-185 and the multi jig SVS-50. With the Tormek TTS - 100 Setting Jig Turning Tools you create the perfect angle and get the best result when working with woodturning tools. The patented woodturning angle divider makes it easy to determine the angle of your gouges and straight and oval woodturning tools with a straight or curved angle and then sharpen them perfectly. The Tormek TTS - 100 Setting Jig Turning Tools can be used in combination with the gouging attachment SVD-185 and the multi jig SVS-50. This makes it even easier to create and maintain the perfect angle when working with woodturning tools.

HBM 300x16x60 mm. cold chisel with super grip handle

Hardened steel 60 mm. chisel with octagonal shaft, a hardened steel blade and shock-absorbing hand protection. Rust-resistant, durable painted finish. For forming and breaking tiles, concrete and other stone materials.

HBM widia knife chisel right

Technical data of the HBM Widia Knife Chisels Right. Equipped with welded fixed Widia Tip.

Tormek svs - 32 tool short chisels

Technical data Developed for: short woodcarving tools Model: SVS-32 Attachment has two parallel flanges on both sides of the Universal Guide Ensures that the tool always remains in the correct position on the grindstone Makes sharpening the sharpening angle easier With the Tormek SVS-32 you can easily sharpen your short woodcarving tools on the Tormek sharpening stone. This attachment has two parallel flanges on both sides of the universal fence, which ensures that your tool always remains in the correct position during sharpening. This way you can fully concentrate on sharpening the sharpening angle. The Tormek SVS-32 is an indispensable tool for anyone who uses short woodcarving tools and wants to sharpen them optimally. Order it today and take advantage of our fast delivery and excellent service!

HBM 4-piece internal turning tool set with hm inserts

The HBM 4-piece interior turning tool set is a high-quality set with indexable inserts from the HBM brand. This set is suitable for turning interior surfaces and it is an indispensable tool for professionals and hobbyists. Technical data: 1 x 10 x 125mm Internal turning tool with CCMT 06 insert 1 x 12 x 150mm Internal turning tool with CCMT 06 insert 1 x 16 x 200mm Internal turning tool with CCMT 09 insert 1 x 20 x 250mm Internal turning tool with CCMT 09 insert This set comes standard with: 2 x CCMT 06 insert mounted on tool 2 x CCMT 09 insert mounted on tool 2 x Torx wrenches 1 x Aluminum storage box With the HBM 4-piece interior turning tool set you can turn your interior surfaces with precision and ease. The set consists of four different chisels with HM inserts that are suitable for different sizes and types of surfaces. The CCMT 06 insert is suitable for smaller surface areas and the CCMT 09 insert is suitable for larger surface areas. This set comes standard with all necessary accessories such as Torx keys and an aluminum storage box for easy transport. Order the HBM 4 Piece Internal Turning Tool Set with HM Inserts now and make your jobs even easier!

HBM 4-part hss internal turning tool set with clamping sleeve

Technical data of the HBM HSS Internal lathe tool set with clamping sleeve. Diameter of the chisel holders 9 or 10 mm. Set consists of a 55 and 60 Degrees chisel. And supplied with 1 drill bit.

HBM 6-piece cold chisel set

Top Quality CRV Steel. Delivered in a steel storage box. Technical data of the HBM 6-part cold chisel set. Length of the cold chisels From 120 to 150 mm.

pica 521 permanent marker 2-6 mm chisel

Permanent Marker Classic from Pica. Special features For permanent marking on almost all surfaces Color: Black Permanent alcohol-based ink Water resistant Indelible after a short drying period Not Technical data of the Pica 521/41 Perm. Marker 2-6mm chisel For permanent marking on almost all surfaces Permanent alcohol based ink Water resistant Indelible after a short drying period "Not dryable": works continuously for up to 14 days Toluene- and xylene-free Chisel point: marketing capacity 2 - 6 mm

Skandia Demolition chisel 600mm

(1)

The Skandia demolition chisel, also called crowbar or crowbar, is mainly used for dismantling and demolition work. For example to remove planks from the wall or floor or to pull large nails from planks and beams. Manufactured from hardened hexagonal forged steel. Painted black with claw and chisel. By placing a bobbin under the claw you increase the leverage. Specifications: Item number: SKA1038761 Barcode: 8711562167705 Brand: SKANDIA Net weight (kg): 0

Skandia Wood chisel plastic 20mm

The Skandia wood chisel with plastic handle is a practical chisel for woodworking. The wood chisel is particularly suitable for chipping wood, such as making a half-timber joint. The cutting angle is 25 to 30 degrees. The large plastic handle provides extra grip and maximum control. Specifications: Barcode: 8711562573520 Brand: SKANDIA Net weight (kg): 0

HBM knife chisel right with hm insert

CCMT 12 suitable for 20 en 25 mm Beitels |

Skandia Wood chisel plastic 18mm

The Skandia wood chisel with plastic handle is a practical chisel for woodworking. The wood chisel is particularly suitable for cutting wood, such as when making a half-timber joint. The cutting angle is 25 to 30 degrees. The large plastic handle provides extra grip and maximum control. Specifications: Item number: SKA1043883 Barcode: 8711562573513 Brand: SKANDIA Net weight (kg): 0

Skandia Wood chisel plastic 16mm

The Skandia wood chisel with plastic handle is a practical chisel for woodworking. The wood chisel is particularly suitable for cutting wood, such as when making a half-timber joint. The cutting angle is 25 to 30 degrees. The large plastic handle provides extra grip and maximum control. Specifications: Item number: SKA1043882 Barcode: 8711562573506 Brand: SKANDIA Net weight (kg): 0

Skandia Wood chisel plastic 10mm

The Skandia wood chisel with plastic handle is a practical chisel for woodworking. The wood chisel is particularly suitable for cutting wood, such as when making a half-timber joint. The cutting angle is 25 to 30 degrees. The large plastic handle provides extra grip and maximum control. Specifications: Item number: SKA1043880 Barcode: 8711562573483 Brand: SKANDIA Net weight (kg): 0

Skandia Wood chisel plastic 6mm

The Skandia wood chisel with plastic handle is a practical chisel for woodworking. The wood chisel is particularly suitable for cutting wood, such as when making a half-timber joint. The cutting angle is 25 to 30 degrees. The large plastic handle provides extra grip and maximum control. Specifications: Item number: SKA1043879 Barcode: 8711562573476 Brand: SKANDIA Net weight (kg): 0

Skandia Cold chisel 200x23x13mm ZB

The Skandia cold chisel, also called metal chisel, is forged from chrome vanadium steel with an impact-resistant head. This chisel is very suitable for cutting off a rusted nut or rebar. Not suitable for hardened steel such as tool steel. Specifications: Item number: SKA1038686 Barcode: 8711562183903 Brand: SKANDIA Net weight (kg): 0

Skandia Demolition chisel 320mm

This Skandia demolition chisel, also called crowbar, is forged from flat spring steel, so you can easily get under and between something. This crowbar is a very handy model due to its short and flat design, making it suitable for smaller demolition work or in places where there is less space. By placing a spool under the claw you increase the leverage. Specifications: Item number: SKA1038763 Barcode: 8711562572547 Brand: SKANDIA Net weight (kg): 0